Bad Boy Tractors 1025 vs Bobcat CT1021 | Side-by-side comparison | ITC Resource Center
Compare Tractors
See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
Engine & Powertrain: 84 months (7 years) or 2,000 hours
24 months / 1,500 hours (whichever occurs first) - covers defects in material and workmanship
Pump Type
Gear pump
Gear
Steering Flow
2.8 gpm
N/A
Implement Flow
4.2 gpm
6.5 gpm (24.5 Lpm)
Total Hydraulic Flow
7.0 gpm
7.2 gpm
Hydraulic System Type
Power Assisted Hydro-Static
Open Center
System Operating Pressure
341.7 lbf/cm2
n/a
Rear Remote Hydraulic Flow
Not Applicable
NOT FOUND
Overall Hydraulic Pump Flow
6.95 gpm
7.2 gpm
No. of Optional Remote Valves
Not Published
1 Pair
No. of Standard Remote Valves
Not Applicable
1
PTO Rear
540 rpm @ 2,893 engine rpm
540 rpm
PTO Type
Independent
Independent
Lift Control Type
Position control
Hydraulic Position Control System
Hitch Lift Capacity
1,323 lb
700 lb.
Mid-PTO Availability
Yes (2,000 rpm @ 2,875 engine rpm)
Standard: 2200 rpm
Category, 3-Point Hitch
Category I (N)
Category 1 Limited
Hitch Lift Capacity (at 24”)
1,101 lb @ 24 in behind lift point
700 lb
R3 Turf - Rear
29X12.5-15
26X12.00-12
R3 Turf - Front
20X8-10
18X8.5-10
Tire Size & Options
R1 (Ag) / R3 (Turf) / R4 (Industrial)
Front AG. (TURF, INDUSTRIAL) 18X8.5-10; Rear AG. (TURF, INDUSTRIAL) 26X12.00-12
R4 Industrial - Rear
27X12-16.5
26X12.00-12
R4 Industrial - Front
23X8.5-12
18X8.5-10
R1 Agricultural - Rear
9.5-16
26X12.00-12
R1 Agricultural - Front
6-12
18X8.5-10
Coolant Capacity
3.8 ℓ (1 US gal)
2.0 (1.9) qts (L)
Crankcase Capacity
2.7 ℓ (0.71 US gal)
5.2 (4.9) qts (L)
Fuel Tank Capacity
22 ℓ (5.81 US gal)
6.7 gal.
Front Axle Fluid Capacity
0.85 gal
NOT FOUND
Transmission / Hydraulic System Capacity
3.83 gal
NOT FOUND
Loader Lift Height
75.5 in (pivot pin)
71.9 in.
Loader Breakout Force
1,531 lb (pivot pin, ground level)
1554 lb.
Quick Attach Loader System
SSQA
Standard Quick Attach Mounting System
Loader Lift Capacity (Full Height)
992 lb (pivot pin)
608 lb.
Loader Model
n/a
FL6
Clutch
No
Clutch-free (Hydrostatic)
No. of Speeds
2 range (Low/High)
2
Transmission Type
Hydraulic + Mechanical H/L with Sliding-mesh MFWD(4WD)
2-Range HST
Max Travel Speed (Forward)
10.5 mph (H range, Ag tires)
11.1 mph (17.8 km/hr.)
Max Travel Speed (Reverse)
Not Published
7.6 mph (12.2 km/hr.)
Differential Lock & Limited Slip Options
Differential lock
Std
Brakes
Wet disc, foot-operated
Wet Multi-disc
Steering
Power steering (hydrostatic)
Hydrostatic Power Steering
Frame Type
Sub-compact tractor; selectable 4WD
Not Published
Front Axle Type
Not Published
Not Published
Drawbar Capacity
Not Published
7.7 kN / 1730 lb
Front Axle Rating
Not Published
Not Published
Seat Suspension & Adjustability
Not Published
Suspension Seat ■
Wheelbase
66.1 in
55.1 in.
Overall Width
50.8 in
46.0 in.
Overall Length
92.5 in
n/a
Ground Clearance
8.2 in
6.3 in.
Height to Top of ROPS
89.7 in
87.6 in.
Height to Top of Cab Model
Not Applicable
NOT FOUND — no source lists a cab-model height. The CT1021 is an open-station (two-post folding ROPS) machine; a Field Cab is a dealer-installed option only, and no cab height spec was found in any source.
Height to Top of ROPS (folded)
Not Published
NOT FOUND — no source explicitly lists the folded ROPS height. The only height figure available across all sources is Height (ROPS) [upright]: 87.6 in (2225 mm)
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
