▶ EngineEngine Manufacturer TYM Daedong Engine Model A1700N6-BUTR_3 CK30: 3A150LWM; CK30 HST: 3A150LWH Engine Type Vertical, 4-stroke, water-cooled diesel 3 cylinder, in-line vertical, water-cooled 4-cycle diesel No. of Cylinders 3 3 Displacement 104.5 in³ 91.5 in³ Rated Engine Speed 2100 rpm 2600 rpm Engine Power (Gross) 25 hp 30 hp PTO Power 19.1 hp CK30: 23 hp; CK30 HST: 22 hp Engine Emissions Constraints Not Published Tier 2 Cooling System Type Water-cooled Water-cooled Air Cleaner Dry Not Published Fuel System Not Published Not Published Alternator 50 A, 12 V 50 A, 12 V ▶ HydraulicsPump Type Gear type (primary 0.8 in³/rev, secondary 0.4 in³/rev) Gear (tandem) Implement Flow 7.5 gpm Not Published Steering Flow 4 gpm Not Published Total Hydraulic Flow 11.5 gpm 12.7 gpm Overall Hydraulic Pump Flow 11.5 gpm 12.7 gpm Hydraulic System Type Open center Open center Rear Remote Hydraulic Flow Not Published Not Published No. of Standard Remote Valves Not Published None No. of Optional Remote Valves Up to 2 2 ▶ Fluid CapacityFuel Tank Capacity 7.13 gal 7.9 gal Coolant Capacity 1.32 gal Not Published Crankcase Capacity 1.14 gal 6.1 qt Transmission / Hydraulic System Capacity 9.77 gal CK30: 7.1 gal; CK30 HST: 7.9 gal Front Axle Fluid Capacity Not Published Not Published ▶ PTO & HitchPTO Type Independent Live PTO Rear 540 rpm 540 rpm (1,000 rpm optional) Mid-PTO Availability Not Published Optional, 2,000 rpm Category, 3-Point Hitch Category I Category I Hitch Lift Capacity 3,307 lb Not Published Hitch Lift Capacity (at 24”) 2,425 lb 1,764 lb Lift Control Type Position control Position control ▶ Transmission & DrivetrainTransmission Type Hydrostatic (HST) CK30: Synchro shuttle; CK30 HST: Hydrostatic No. of Speeds 3 range (A/B/C) CK30: 8F/8R; CK30 HST: Infinite, 3 range Max Travel Speed (Forward) Not Published CK30: 14.91 mph; CK30 HST: 13.07 mph Max Travel Speed (Reverse) Not Published CK30: 13.14 mph; CK30 HST: 9.15 mph Clutch None (HST) CK30: Dry dual; CK30 HST: Dry single Differential Lock & Limited Slip Options Rear differential lock Differential lock (standard) ▶ Chassis, Steering & ControlsFrame Type Heavy-duty steel frame with cast iron axles Not Published Steering Fully hydraulic power steering Hydrostatic power steering Brakes Wet multi-disc Wet disc Seat Suspension & Adjustability Not Published Not Published Front Axle Type Selectable 4WD Bevel gear type Front Axle Rating Not Published Not Published Drawbar Capacity Not Published Not Published ▶ Dimensions & ManeuverabilityOverall Width 56.7 in 54.6 in Wheelbase 65.7 in 66.1 in Ground Clearance 13.1 in 13.82 in Min. Turn Radius without Brakes Not Published 9.5 ft (with brake applied) Height to Top of ROPS 104.06 in 96.8 in Height to Top of ROPS (folded) Not Published Not Published Height to Top of Cab Model Not Published Not Published Overall Length 134.88 in 122.2 in (with 3-point hitch) ▶ WeightTractor Weight (Base) 2,970 lb CK30: 3,184 lb; CK30 HST: 3,142 lb Weight with ROPS and Loader Not Published Not Published Weight with Cab and Loader Not Published Not Published ▶ Tire OptionsTire Size & Options R4 Industrial (25x8.50-14 / 15-19.5) Front AG 7-14 (Turf 27x8.50-15, Industrial 25x8.50-14); Rear AG 11.2-24 (Turf 41x14.00-20, Industrial 15-19.5) R1 Agricultural - Front 8.0-16 7-14 R1 Agricultural - Rear 12.4-24 11.2-24 R3 Turf - Front Not Published 27x8.50-15 R3 Turf - Rear Not Published 41x14.00-20 R4 Industrial - Front 25x8.50-14 25x8.50-14 R4 Industrial - Rear 15-19.5 15-19.5 ▶ Loader & AttachmentsQuick Attach Loader System Quick attach front loader Not Published Loader Model BBL400 KL130 Loader Lift Height 104 in KL130: 92.5 in Loader Lift Capacity (Full Height) 2,200 lb (at pivot pin) KL130: 1,155 lb (at pivot pins, full height) Loader Breakout Force 3,660 lbf KL130: 2,046 lb (at pivot pins) ▶ WarrantyWarranty Length & Coverage Basic 24 months or 1,000 hours; powertrain 72 months or 2,000 hours; loader and backhoe 24 months from shipment, 12 months from sale, or 500 hours Not Published ▶ ITC Company AccessoriesAccessories that fit 
