▶ EngineEngine Manufacturer TYM Kukje Engine Model A1700N6-BUTR_3 A1100N2 Engine Type Vertical, 4-stroke, water-cooled diesel Four-stroke, naturally aspirated, indirect injection, water-cooled diesel No. of Cylinders 3 3 Displacement 104.5 in³ 71.7 in³ Rated Engine Speed 2100 rpm 2600 rpm Engine Power (Gross) 25 hp 24 hp PTO Power 19.1 hp 16.9 hp Engine Emissions Constraints Not Published Tier 4 Cooling System Type Water-cooled Water-cooled Air Cleaner Dry Not Published Fuel System Not Published Indirect Injection Alternator 50 A, 12 V 50 A, 12 V ▶ HydraulicsPump Type Gear type (primary 0.8 in³/rev, secondary 0.4 in³/rev) Not Published Implement Flow 7.5 gpm 4.5 gpm Steering Flow 4 gpm Not Published Total Hydraulic Flow 11.5 gpm 7.1 gpm Overall Hydraulic Pump Flow 11.5 gpm 7.1 gpm Hydraulic System Type Open center Open Center Rear Remote Hydraulic Flow Not Published Not Published No. of Standard Remote Valves Not Published Not Published No. of Optional Remote Valves Up to 2 Not Published ▶ Fluid CapacityFuel Tank Capacity 7.13 gal 5.8 gal Coolant Capacity 1.32 gal 3.7 qt Crankcase Capacity 1.14 gal 2.3 qt Transmission / Hydraulic System Capacity 9.77 gal 15.3 qt Front Axle Fluid Capacity Not Published Not Published ▶ PTO & HitchPTO Type Independent Independent PTO Rear 540 rpm 540 @ 2550 rpm Mid-PTO Availability Not Published Available; 2000 @ 2550 rpm Category, 3-Point Hitch Category I CAT I with Check Chains Hitch Lift Capacity 3,307 lb 1,323 lb Hitch Lift Capacity (at 24”) 2,425 lb Not Published Lift Control Type Position control Not Published ▶ Transmission & DrivetrainTransmission Type Hydrostatic (HST) HST - 2 range No. of Speeds 3 range (A/B/C) Infinite Max Travel Speed (Forward) Not Published Not Published Max Travel Speed (Reverse) Not Published Not Published Clutch None (HST) Dry-Single Differential Lock & Limited Slip Options Rear differential lock Mechanical rear differential lock ▶ Chassis, Steering & ControlsFrame Type Heavy-duty steel frame with cast iron axles Not Published Steering Fully hydraulic power steering Power steering Brakes Wet multi-disc Wet Disc Seat Suspension & Adjustability Not Published Not Published Front Axle Type Selectable 4WD Not Published Front Axle Rating Not Published Not Published Drawbar Capacity Not Published Not Published ▶ Dimensions & ManeuverabilityOverall Width 56.7 in 45.8 in Wheelbase 65.7 in 57.5 in Ground Clearance 13.1 in 9.4 in Min. Turn Radius without Brakes Not Published 7.2 ft Height to Top of ROPS 104.06 in 91.3 in Height to Top of ROPS (folded) Not Published Not Published Height to Top of Cab Model Not Published 78.2 in Overall Length 134.88 in 100.5 in ▶ WeightTractor Weight (Base) 2,970 lb 1,638 lb Weight with ROPS and Loader Not Published Not Published Weight with Cab and Loader Not Published 2,419 lb (1,870 + 549, computed; 25LSK loader shipping weight) ▶ Tire OptionsTire Size & Options R4 Industrial (25x8.50-14 / 15-19.5) AG, IND, TURF R1 Agricultural - Front 8.0-16 6x12 R1 Agricultural - Rear 12.4-24 9.5x16 R3 Turf - Front Not Published 20x8-10 R3 Turf - Rear Not Published 29x12.5-15 R4 Industrial - Front 25x8.50-14 20x8-10 R4 Industrial - Rear 15-19.5 27x12.5-15 ▶ Loader & AttachmentsQuick Attach Loader System Quick attach front loader 25LSK: Skid steer style quick coupler, standard Loader Model BBL400 25LSK Loader Lift Height 104 in 25LSK: 75.3 in Loader Lift Capacity (Full Height) 2,200 lb (at pivot pin) 25LSK: 900 lb Loader Breakout Force 3,660 lbf 25LSK: 2,000 lb ▶ WarrantyWarranty Length & Coverage Basic 24 months or 1,000 hours; powertrain 72 months or 2,000 hours; loader and backhoe 24 months from shipment, 12 months from sale, or 500 hours Not Published ▶ ITC Company AccessoriesAccessories that fit 
