▶ EngineEngine Manufacturer TYM Yanmar Engine Model A1700N4-BUTR_4 3TNV82A-BMJK Engine Type Vertical, 4-stroke, water-cooled diesel 3-cylinder liquid-cooled diesel No. of Cylinders 3 3 Displacement 104.7 in³ 81.2 in³ Rated Engine Speed 2600 rpm 2600 rpm Engine Power (Gross) 35 hp 26.5 hp PTO Power 29.5 hp 20.5 hp Engine Emissions Constraints EPA Final Tier4 Not Published Cooling System Type Water-cooled Liquid-cooled Air Cleaner Not Published Dry type, two stage Fuel System Not Published Not Published Alternator 50 A, 12 V 20 A ▶ HydraulicsPump Type Not Published Not Published Implement Flow 8.2 gpm 5.0 gpm Steering Flow 4.4 gpm 5.5 gpm Total Hydraulic Flow 12.6 gpm 10.5 gpm Overall Hydraulic Pump Flow 12.6 gpm 10.5 gpm Hydraulic System Type Open center Not Published Rear Remote Hydraulic Flow Not Published Not Published No. of Standard Remote Valves Not Published 2 No. of Optional Remote Valves Up to 2 Not Published ▶ Fluid CapacityFuel Tank Capacity 7.13 gal 7.1 gal Coolant Capacity 1.32 gal 4.1 qt Crankcase Capacity 1.14 gal 3.0 qt Transmission / Hydraulic System Capacity 9.77 gal 3.9 gal Front Axle Fluid Capacity 1.69 gal 3.6 qt ▶ PTO & HitchPTO Type Independent Independent PTO Rear 540 rpm 540 rpm (rear PTO standard) Mid-PTO Availability Not Published Standard Category, 3-Point Hitch Category I Category 1 Hitch Lift Capacity 3,306.9 lb 1433 lb Hitch Lift Capacity (at 24”) 2,425 lb 1150 lb Lift Control Type Position control Position control ▶ Transmission & DrivetrainTransmission Type Hydrostatic (HST), 3-range 2-range hydrostatic No. of Speeds 3 range (HST) Infinite forward and reverse, 2 ranges Max Travel Speed (Forward) 19.08 mph 13.0 mph Max Travel Speed (Reverse) 19.08 mph 13.0 mph Clutch None (HST) Not Published Differential Lock & Limited Slip Options Rear differential lock Not Published ▶ Chassis, Steering & ControlsFrame Type Not Published Folding ROPS standard Steering Hydrostatic power steering Power steering Brakes Wet, multi-disc Wet disk Seat Suspension & Adjustability Not Published Not Published Front Axle Type Selectable 4WD Mechanical front wheel drive (MFWD), standard, all ranges, engages on the go Front Axle Rating Not Published 1940 lb Drawbar Capacity Not Published Not Published ▶ Dimensions & ManeuverabilityOverall Length with 3-Point Hitch 134.88 in 108.9 in Overall Width 56.7 in 51.0 in (minimum, standard tires) Wheelbase 65.7 in 65.2 in Ground Clearance 15 in 13 in (front axle); 11 in (rear axle drawbar) Min. Turn Radius without Brakes Not Published 8.2 ft Height to Top of ROPS 96.85 in 90 in Height to Top of ROPS (folded) Not Published 68.9 in Height to Top of Cab Model 85.9 in Not Published ▶ WeightTractor Weight (Base) 3,163.6 lb 1865 lb Weight with ROPS and Loader Not Published Not Published Weight with Cab and Loader Not Published Not Published ▶ Tire OptionsTire Size & Options R1 ag 8.0-16 / 12.4-24 (standard); R4 industrial 28x8.50-15 / 43x16.00-20 R3 turf standard (24x8.5-14 front, 36x14.00-15 rear); R4 industrial optional (23x8.5-12 front, 14-17.5 rear) R1 Agricultural - Front 8.0-16 Not Published R1 Agricultural - Rear 12.4-24 Not Published R3 Turf - Front Not Published 24x8.5-14 R3 Turf - Rear Not Published 36x14.00-15 R4 Industrial - Front 28x8.50-15 23x8.5-12 R4 Industrial - Rear 43x16.00-20 14-17.5 ▶ Loader & AttachmentsQuick Attach Loader System SSQA Quik-Park loader mounting; 200CX attaches and detaches in under 3 minutes with no tools Loader Model BBL400 200CX Loader Lift Height 104 in 200CX: 78.5 in Loader Lift Capacity (Full Height) 2,200 lb 200CX: 800 lb (at full height, measured at pivot) Loader Breakout Force 3,660 lb 200CX: 2239 lbf (at pin) ▶ WarrantyWarranty Length & Coverage Engine and powertrain 72 months or 2,000 hours; other tractor parts 24 months or 1,000 hours 3-year / 2,000-hour limited warranty (as sold new) ▶ ITC Company AccessoriesAccessories that fit None tagged yet 
