▶ EngineEngine Manufacturer TYM Yanmar Engine Model A2300N3 3TNV84T-KJT Engine Type 4 cylinder water-cooled diesel, naturally aspirated 3-cylinder turbocharged liquid-cooled diesel, direct injection No. of Cylinders 4 3 Displacement 139.5 in³ 91.5 in³ Rated Engine Speed 2600 rpm 2800 rpm Engine Power (Gross) 48 hp 41 hp PTO Power 38.4 hp 32.5 hp Engine Emissions Constraints Tier 4 Not Published Cooling System Type Water-cooled Liquid-cooled Air Cleaner Dry element Dry type with safety element Fuel System Not Published Direct injection, self bleeding, in-line fuel pump with electric shutoff Alternator 70 A, 12 V 40 A ▶ HydraulicsPump Type Not Published Dual tandem gear pump Implement Flow 10.7 gpm 9.2 gpm Steering Flow 5 gpm 5.7 gpm Total Hydraulic Flow 15.7 gpm 14.8 gpm Overall Hydraulic Pump Flow 15.7 gpm 14.8 gpm Hydraulic System Type Open center Open center Rear Remote Hydraulic Flow Not Published Not Published No. of Standard Remote Valves 4 ports 2 No. of Optional Remote Valves Not Published Not Published ▶ Fluid CapacityFuel Tank Capacity 11.8 gal 11.5 gal Coolant Capacity 1.56 gal 1.4 gal Crankcase Capacity 1.20 gal 4.5 qt Transmission / Hydraulic System Capacity 10.04 gal 8.3 gal Front Axle Fluid Capacity 1.90 gal 1.2 gal ▶ PTO & HitchPTO Type Independent Independent, wet disk clutch PTO Rear 540 / 540E rpm 540 rpm Mid-PTO Availability Not Published Not Published Category, 3-Point Hitch Category I Category 1 Hitch Lift Capacity 3,306 lb Not Published Hitch Lift Capacity (at 24”) 2,425 lb 2200 lb Lift Control Type Position control Position control ▶ Transmission & DrivetrainTransmission Type Hydrostatic (HST), 4-range 2-range hydrostatic No. of Speeds 4 range (HST) Infinite forward and reverse, 2 ranges Max Travel Speed (Forward) 19.5 mph 13 mph Max Travel Speed (Reverse) 19.5 mph 12.6 mph Clutch None (HST) Wet disk Differential Lock & Limited Slip Options Rear differential lock (standard) Mechanical rear differential lock (ball, ramp and pin) ▶ Chassis, Steering & ControlsFrame Type Compact utility tractor, 4WD Fixed ROPS; four-wheel drive standard Steering Hydrostatic power steering Hydrostatic power steering Brakes Wet, multi-disc Wet disk Seat Suspension & Adjustability Heated leather seat (cab) Not Published Front Axle Type Selectable 4WD Mechanical front wheel drive (MFWD), standard, all ranges Front Axle Rating Not Published 3197 lb Drawbar Capacity Not Published 882 lb ▶ Dimensions & ManeuverabilityOverall Length with 3-Point Hitch 127.4 in 120.2 in Overall Width 64.9 in 63 in (minimum, R1 rear tires); 65.8 in (maximum, R4 rear tires) Wheelbase 71.1 in 68 in Ground Clearance 15.5 in 14.7 in (front axle) Min. Turn Radius without Brakes 110.2 in (with brake applied) Not Published Height to Top of ROPS Not Published 87.6 in Height to Top of ROPS (folded) Not Published Not Published Height to Top of Cab Model 97.0 in Not Published ▶ WeightTractor Weight (Base) 4,349 lb 2899 lb Weight with ROPS and Loader Not Published Not Published Weight with Cab and Loader Not Published Not Published ▶ Tire OptionsTire Size & Options 9.5-16 front / 13.6-26 rear (ag) R1 bar tread (8.00-16 front, 14.9-24 rear) or R4 industrial (10.0-16.5 front, 17.5L-24 rear) R1 Agricultural - Front 9.5-16 8.00-16 R1 Agricultural - Rear 13.6-26 14.9-24 R3 Turf - Front Not Published Not Published R3 Turf - Rear Not Published Not Published R4 Industrial - Front Not Published 10.0-16.5 R4 Industrial - Rear Not Published 17.5L-24 ▶ Loader & AttachmentsQuick Attach Loader System SSQA Not Published Loader Model BBL500 300CX Loader Lift Height 106.6 in H165: 103 in; 320R: 103 in Loader Lift Capacity (Full Height) 2,700 lb 300CX: 1393 lb (at full height, measured at pivot) Loader Breakout Force 3,660 lb H165: 3769 lbf; 320R: 3769 lbf; 300CX: 3769 lbf (at pivot point) ▶ WarrantyWarranty Length & Coverage Engine and powertrain 72 months or 2,000 hours; other tractor parts 24 months or 1,000 hours 3-year / 2,000-hour limited warranty (as sold new) ▶ ITC Company AccessoriesAccessories that fit None tagged yet 
