See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
24 months of coverage from defects in material and workmanship or 1,500 hours of usage (whichever occurs first)
Pump Type
Hydrostatic Power Steering
Gear
Steering Flow
5.0 gpm
4.5 gpm
Implement Flow
5055S: 11.4 gpm; 5055H: 10.7 gpm
6.9 gpm
Total Hydraulic Flow
5055S: 16.4 gpm; 5055H: 15.7 gpm
11.3 gpm
Hydraulic System Type
Not Published
Open Center
Rear Remote Hydraulic Flow
Not Published
NOT FOUND — no source reviewed explicitly lists a separate 'Rear Remote Hydraulic Flow' figure for the CT2540. Sources only report total Implement Pump Flow of 11.7 gpm (44.5 Lpm).
Overall Hydraulic Pump Flow
5055S: 16.4 gpm; 5055H: 15.7 gpm
11.7 gpm (44.5 Lpm)
No. of Optional Remote Valves
Up to 2 rear SCVs
NOT FOUND — no source reviewed explicitly lists a count of *optional* remote valves for the CT2540. The spec sheet at tractorgearbox.com lists 'Number of Standard Remote Valves: 1/2' only.
No. of Standard Remote Valves
Not Published
Std. (4 port)
PTO Rear
540 / 540E rpm
540/540E RPM
PTO Type
Independent
Independent
Lift Control Type
Not Published
Position
Hitch Lift Capacity
3,306 lb
2,270.7 lb
Mid-PTO Availability
Not Published
2000.0 RPM
Category, 3-Point Hitch
Category 1
Category 1
Hitch Lift Capacity (at 24”)
2,425 lb
1,631 lb
R3 Turf - Rear
Not Published
41x14.0-20 R3
R3 Turf - Front
Not Published
27x8.5-15 R3
Tire Size & Options
Not Published
Not Published
R4 Industrial - Rear
Not Published
15-19.5 R4
R4 Industrial - Front
Not Published
25x8.5-14 R4
R1 Agricultural - Rear
Not Published
11.4-24 R1
R1 Agricultural - Front
Not Published
7-16 R1
Coolant Capacity
CABIN: 1.56 gal, ROPS: 2.08 gal
NOT FOUND — field label present in source but numeric value is truncated/missing in all retrieved results
Crankcase Capacity
1.20 gal
6.4 qts
Fuel Tank Capacity
11.8 gal
9 gal
Front Axle Fluid Capacity
1.90 gal
NOT FOUND — no explicit value located in any source
Transmission / Hydraulic System Capacity
10.04 gal
NOT FOUND — no explicit fill capacity value located in any source
Loader Lift Height
107.7 in (pivot pin)
100 in
Loader Breakout Force
3,660 lb
2838 lbs
Quick Attach Loader System
SSQA
NOT FOUND — no CT2540-specific quick attach system name/model explicitly stated in any source reviewed
Loader Lift Capacity (Full Height)
2,701 lb
1389 lbs
Loader Model
—
Bobcat FL8
Clutch
Not Published
Not Published
No. of Speeds
5055S: 16F/16R; 5055H: 4-range
3 range
Transmission Type
Synchromesh (Mechanical models) or HST (Hydrostatic models)
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
