See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
Water with pressurized radiator, reverse air-flow design
Engine Manufacturer
Daedong
Kubota
Engine Power (Gross)
21 hp
21.6 hp
Engine Emissions Constraints
Tier 4
Not Published
Weight with ROPS and Loader
Not Published
Not Published
Weight with Cab and Loader
Not Published
Not Applicable
Warranty Length & Coverage
24 months / 1,500 hours (whichever occurs first) - covers defects in material and workmanship
Non-Commercial Home & Residential Use - Basic Standard Limited: 24 months or 1500 hours; Limited Powertrain: 72 months or 2000 hours. Commercial Use - Basic Standard Limited: 24 months or 1500 hours; Limited Powertrain: 36 months or 2000 hours.
Pump Type
Gear
Open center tandem pump gear type
Steering Flow
N/A
1.0 gpm
Implement Flow
6.5 gpm (24.5 Lpm)
5.2 gpm
Total Hydraulic Flow
7.2 gpm
6.2 gpm
Hydraulic System Type
Open Center
Open center
Rear Remote Hydraulic Flow
NOT FOUND
Not Published
Overall Hydraulic Pump Flow
7.2 gpm
6.2 gpm
No. of Optional Remote Valves
1 Pair
2 (optional; ISO 7241-1 series A or B)
No. of Standard Remote Valves
1
Not Published
PTO Rear
540 rpm
STD (540 rpm)
PTO Type
Independent
Live independent PTO (with hydraulic clutch)
Lift Control Type
Hydraulic Position Control System
Not Published
Hitch Lift Capacity
700 lb.
Not Published
Mid-PTO Availability
Standard: 2200 rpm
STD (2500 rpm)
Category, 3-Point Hitch
Category 1 Limited
SAE Category I Optional
Hitch Lift Capacity (at 24”)
700 lb
680 lb
R3 Turf - Rear
26X12.00-12
26X12-12
R3 Turf - Front
18X8.5-10
18X8.5-10
Tire Size & Options
Front AG. (TURF, INDUSTRIAL) 18X8.5-10; Rear AG. (TURF, INDUSTRIAL) 26X12.00-12
R1 Agricultural, R3 Turf, R4 Industrial
R4 Industrial - Rear
26X12.00-12
26X12-12
R4 Industrial - Front
18X8.5-10
18X8.5-10
R1 Agricultural - Rear
26X12.00-12
26X12-12
R1 Agricultural - Front
18X8.5-10
18X8.5-10
Coolant Capacity
2.0 (1.9) qts (L)
Not Published
Crankcase Capacity
5.2 (4.9) qts (L)
Not Published
Fuel Tank Capacity
6.7 gal.
6.6 gal
Front Axle Fluid Capacity
NOT FOUND
Not Published
Transmission / Hydraulic System Capacity
NOT FOUND
Not Published
Loader Model
FL6
—
Loader Lift Height
71.9 in.
71.0 in
Loader Breakout Force
1554 lb.
1,286 lbf (bucket pivot pin)
Quick Attach Loader System
Standard Quick Attach Mounting System
Swift-Tach Loader (LA344S - Two Lever Quick Attach Bucket)
Loader Lift Capacity (Full Height)
608 lb.
739 lb
Clutch
Clutch-free (Hydrostatic)
Dry type single plate - Main clutch 9.45 in.
No. of Speeds
2
2 Range (Low-High)
Transmission Type
2-Range HST
Hydrostatic transmission
Max Travel Speed (Forward)
11.1 mph (17.8 km/hr.)
8.1 mph
Max Travel Speed (Reverse)
7.6 mph (12.2 km/hr.)
6.2 mph
Differential Lock & Limited Slip Options
Std
Rear differential lock standard
Brakes
Wet Multi-disc
Mechanical, wet disc type
Steering
Hydrostatic Power Steering
Integral power steering
Frame Type
Not Published
Not Published
Front Axle Type
Not Published
4WD: Bevel gear front axle, non-adjustable tread spacing
Drawbar Capacity
7.7 kN / 1730 lb
Max. drawbar load @ hitch: 550 lb.
Front Axle Rating
Not Published
Not Published
Seat Suspension & Adjustability
Suspension Seat ■
Not Published
Wheelbase
55.1 in.
55.1 in
Overall Width
46.0 in.
45.1 in
Ground Clearance
6.3 in.
6.5 in
Height to Top of ROPS
87.6 in.
83.1 in
Height to Top of Cab Model
NOT FOUND — no source lists a cab-model height. The CT1021 is an open-station (two-post folding ROPS) machine; a Field Cab is a dealer-installed option only, and no cab height spec was found in any source.
Not Applicable
Height to Top of ROPS (folded)
NOT FOUND — no source explicitly lists the folded ROPS height. The only height figure available across all sources is Height (ROPS) [upright]: 87.6 in (2225 mm)
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
