See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
24 months / 1,500 hours (whichever occurs first) - covers defects in material and workmanship
Non-Commercial Home & Residential Use - Basic Standard Limited: 24 months or 1500 hours; Limited Powertrain: 72 months or 2000 hours. Commercial Use - Basic Standard Limited: 24 months or 1500 hours.
Pump Type
Gear
Hydrostatic transmission
Steering Flow
N/A
1.0 gpm
Implement Flow
6.5 gpm (24.5 Lpm)
6.2 gpm (23.5 l/min.)
Total Hydraulic Flow
7.2 gpm
6.2 gpm
Hydraulic System Type
Open Center
Open center tandem pump gear type
Rear Remote Hydraulic Flow
NOT FOUND
Not Published
Overall Hydraulic Pump Flow
7.2 gpm
6.2 gpm
No. of Optional Remote Valves
1 Pair
2 (optional; ISO 7241-1 series A or B)
No. of Standard Remote Valves
1
2 valves
System Operating Pressure
—
12.3 MPa to 12.8 MPa
PTO Rear
540 rpm
STD 540 rpm
PTO Type
Independent
Live independent PTO (with hydraulic clutch)
Lift Control Type
Hydraulic Position Control System
Quarter-inching valve
Hitch Lift Capacity
700 lb.
1,213 lbs.
Mid-PTO Availability
Standard: 2200 rpm
STD (2500rpm)
Category, 3-Point Hitch
Category 1 Limited
SAE Category 1
Hitch Lift Capacity (at 24”)
700 lb
680 lb
R3 Turf - Rear
26X12.00-12
26×12-12
R3 Turf - Front
18X8.5-10
18×8.5-10
Tire Size & Options
Front AG. (TURF, INDUSTRIAL) 18X8.5-10; Rear AG. (TURF, INDUSTRIAL) 26X12.00-12
Front Turf/Industrial: 18×8.5-10; Rear Turf/Industrial: 26×12-12; Bar tire N/A
R4 Industrial - Rear
26X12.00-12
26×12-12
R4 Industrial - Front
18X8.5-10
18×8.5-10
R1 Agricultural - Rear
26X12.00-12
Not Applicable
R1 Agricultural - Front
18X8.5-10
Not Applicable
Coolant Capacity
2.0 (1.9) qts (L)
0.8 gal (3.3 U.S.qts.)
Crankcase Capacity
5.2 (4.9) qts (L)
0.9 gal (3.4 U.S.qts.)
Fuel Tank Capacity
6.7 gal.
6.6 gal (6.6 U.S.gals.)
Front Axle Fluid Capacity
NOT FOUND
Not Published
Transmission / Hydraulic System Capacity
NOT FOUND
2.98 U.S. gals.
Loader Model
FL6
—
Loader Lift Height
71.9 in.
71.0 in
Loader Breakout Force
1554 lb.
6258 N (1407 lbs) [LA340] / 5719 N (1286 lbs) [LA340S]
4WD: Bevel gear front axle, non-adjustable tread spacing
Drawbar Capacity
7.7 kN / 1730 lb
Maximum tongue weight 550 lb.
Front Axle Rating
Not Published
Not Published
Seat Suspension & Adjustability
Suspension Seat ■
Not Published
Wheelbase
55.1 in.
55.1 in (55.1 in.)
Overall Width
46.0 in.
45.1 in (45.1 in.)
Ground Clearance
6.3 in.
5.8 in (5.83 in.)
Height to Top of ROPS
87.6 in.
86.2 in (86.2 in.)
Height to Top of Cab Model
NOT FOUND — no source lists a cab-model height. The CT1021 is an open-station (two-post folding ROPS) machine; a Field Cab is a dealer-installed option only, and no cab height spec was found in any source.
Not Applicable
Height to Top of ROPS (folded)
NOT FOUND — no source explicitly lists the folded ROPS height. The only height figure available across all sources is Height (ROPS) [upright]: 87.6 in (2225 mm)
Not Published
Min. Turn Radius without Brakes
100.0 in.
7.5 feet
Overall Length with 3-Point Hitch
99.3 in.
99.0 in. w/3-Pt., w/ Front guard
Overall Length
—
87 in (87.0 in.) w / Front guard (without 3P), 99 in (99.0 in.) w / Front guard (with 3P)
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
