See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
24 months / 1,500 hours (whichever occurs first) - covers defects in material and workmanship
Not Published
Pump Type
Gear
Not Published
Steering Flow
N/A
3.2 gpm
Implement Flow
6.5 gpm (24.5 Lpm)
5.5 gpm
Total Hydraulic Flow
7.2 gpm
8.8 gpm
Hydraulic System Type
Open Center
Open center
Rear Remote Hydraulic Flow
NOT FOUND
Not Published
Overall Hydraulic Pump Flow
7.2 gpm
8.8 gpm
No. of Optional Remote Valves
1 Pair
Not Published
No. of Standard Remote Valves
1
2
PTO Rear
540 rpm
540 rpm
PTO Type
Independent
Independent
Lift Control Type
Hydraulic Position Control System
Not Published
Hitch Lift Capacity
700 lb.
1,433 lb
Mid-PTO Availability
Standard: 2200 rpm
Optional (2,000 rpm)
Category, 3-Point Hitch
Category 1 Limited
Category I
Hitch Lift Capacity (at 24”)
700 lb
1,091 lb
R3 Turf - Rear
26X12.00-12
315X75D-15
R3 Turf - Front
18X8.5-10
24X8.50-12
Tire Size & Options
Front AG. (TURF, INDUSTRIAL) 18X8.5-10; Rear AG. (TURF, INDUSTRIAL) 26X12.00-12
R1 Agricultural, R3 Turf
R4 Industrial - Rear
26X12.00-12
Not Published
R4 Industrial - Front
18X8.5-10
Not Published
R1 Agricultural - Rear
26X12.00-12
9.5-18
R1 Agricultural - Front
18X8.5-10
6.00-12
Coolant Capacity
2.0 (1.9) qts (L)
Not Published
Crankcase Capacity
5.2 (4.9) qts (L)
Not Published
Fuel Tank Capacity
6.7 gal.
7.4 gal
Front Axle Fluid Capacity
NOT FOUND
Not Published
Transmission / Hydraulic System Capacity
NOT FOUND
Not Published
Loader Model
FL6
—
Loader Lift Height
71.9 in.
83 in
Loader Breakout Force
1554 lb.
1,822 lb
Quick Attach Loader System
Standard Quick Attach Mounting System
FL.2106: Skid Steer Tool Carrier
Loader Lift Capacity (Full Height)
608 lb.
1,222 lb
Clutch
Clutch-free (Hydrostatic)
Not Published
No. of Speeds
2
3 Ranges
Transmission Type
2-Range HST
Hydrostatic
Max Travel Speed (Forward)
11.1 mph (17.8 km/hr.)
Not Published
Max Travel Speed (Reverse)
7.6 mph (12.2 km/hr.)
Not Published
Differential Lock & Limited Slip Options
Std
Differential lock (LHS pedal)
Brakes
Wet Multi-disc
Internal wet disc
Steering
Hydrostatic Power Steering
Not Published
Frame Type
Not Published
Not Published
Front Axle Type
Not Published
Not Published
Drawbar Capacity
7.7 kN / 1730 lb
Not Published
Front Axle Rating
Not Published
Not Published
Seat Suspension & Adjustability
Suspension Seat ■
Not Published
Wheelbase
55.1 in.
61.4 in
Overall Width
46.0 in.
45.7-52 in (1,160-52 in)
Ground Clearance
6.3 in.
9.9-11 in (250-12 in)
Height to Top of ROPS
87.6 in.
95.3-97.5 in (2,420-97.4 in)
Height to Top of Cab Model
NOT FOUND — no source lists a cab-model height. The CT1021 is an open-station (two-post folding ROPS) machine; a Field Cab is a dealer-installed option only, and no cab height spec was found in any source.
80-82.1 in (2,030-82.1 in)
Height to Top of ROPS (folded)
NOT FOUND — no source explicitly lists the folded ROPS height. The only height figure available across all sources is Height (ROPS) [upright]: 87.6 in (2225 mm)
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
