▶ EnginePTO Power 16.3 hp NOT FOUND Alternator alternator 42 A, 12 V Air Cleaner NOT FOUND Dry with Clogging Sensor Engine Type Diesel 3-Cylinder Diesel Engine Fuel System Mechanical Fuel Injection; Indirect (Swirl chamber) — Displacement 61.4 in³ 80.5 in³ Engine Model 3C100LWH-U2 NOT FOUND No. of Cylinders 3 3 Rated Engine Speed 3200 2500 rpm Cooling System Type Water-cooled NOT FOUND — no cooling system type explicitly stated for the H26 in any retrieved source Engine Manufacturer Daedong Mitsubishi Engine Power (Gross) 21 hp 26 hp Engine Emissions Constraints Tier 4 NOT FOUND ▶ WeightWeight with ROPS and Loader Not Published — Weight with Cab and Loader Not Published — ▶ WarrantyWarranty Length & Coverage 24 months / 1,500 hours (whichever occurs first) - covers defects in material and workmanship — ▶ HydraulicsPump Type Gear — Steering Flow N/A — Implement Flow 6.5 gpm (24.5 Lpm) — Total Hydraulic Flow 7.2 gpm — Hydraulic System Type Open Center — Rear Remote Hydraulic Flow NOT FOUND — Overall Hydraulic Pump Flow 7.2 gpm — No. of Optional Remote Valves 1 Pair 3 DA (Cabin) No. of Standard Remote Valves 1 1 DA ▶ PTO & HitchPTO Rear 540 rpm — PTO Type Independent — Lift Control Type Hydraulic Position Control System NOT FOUND Hitch Lift Capacity 700 lb. — Mid-PTO Availability Standard: 2200 rpm Yes - Mid & Rear PTO standard Category, 3-Point Hitch Category 1 Limited — Hitch Lift Capacity (at 24”) 700 lb — ▶ Tire OptionsR3 Turf - Rear 26X12.00-12 13.80-16 R3 Turf - Front 18X8.5-10 25x8.50-14 Tire Size & Options Front AG. (TURF, INDUSTRIAL) 18X8.5-10; Rear AG. (TURF, INDUSTRIAL) 26X12.00-12 — R4 Industrial - Rear 26X12.00-12 33x15.50-16.5 R4 Industrial - Front 18X8.5-10 23x8.50-12 R1 Agricultural - Rear 26X12.00-12 280/70 R18 R1 Agricultural - Front 18X8.5-10 6.5/80-12 | 280/70 R18 ▶ Fluid CapacityCoolant Capacity 2.0 (1.9) qts (L) — Crankcase Capacity 5.2 (4.9) qts (L) — Fuel Tank Capacity 6.7 gal. — Front Axle Fluid Capacity NOT FOUND — Transmission / Hydraulic System Capacity NOT FOUND — ▶ Loader & AttachmentsLoader Model FL6 — Loader Lift Height 71.9 in. — Loader Breakout Force 1554 lb. NOT FOUND Quick Attach Loader System Standard Quick Attach Mounting System YES optional Loader Lift Capacity (Full Height) 608 lb. — ▶ Transmission & DrivetrainClutch Clutch-free (Hydrostatic) Wet Type Clutch for PTO No. of Speeds 2 2-speed hydrostatic Transmission Type 2-Range HST Hydrostatic Max Travel Speed (Forward) 11.1 mph (17.8 km/hr.) 21.03 Km/Hr @2660 Max Travel Speed (Reverse) 7.6 mph (12.2 km/hr.) NOT FOUND Differential Lock & Limited Slip Options Std — ▶ Chassis, Steering & ControlsBrakes Wet Multi-disc — Steering Hydrostatic Power Steering Power Steering Frame Type Not Published — Front Axle Type Not Published 4WD Drawbar Capacity 7.7 kN / 1730 lb — Front Axle Rating Not Published — Seat Suspension & Adjustability Suspension Seat ■ Suspended seat with: suspension adjustment knob (knob 2), vertical height adjustment knob (knob 3), horizontal fore/aft lever (lever 1); operator weight range adjustable 50-308.6 lbf ▶ Dimensions & ManeuverabilityWheelbase 55.1 in. 61.8 in Overall Width 46.0 in. — Ground Clearance 6.3 in. — Height to Top of ROPS 87.6 in. 92.5 in Height to Top of Cab Model NOT FOUND — no source lists a cab-model height. The CT1021 is an open-station (two-post folding ROPS) machine; a Field Cab is a dealer-installed option only, and no cab height spec was found in any source. NOT FOUND — H26 is listed as ROPS-only in all sources; no cab model height found Height to Top of ROPS (folded) NOT FOUND — no source explicitly lists the folded ROPS height. The only height figure available across all sources is Height (ROPS) [upright]: 87.6 in (2225 mm) NOT FOUND Min. Turn Radius without Brakes 100.0 in. — Overall Length with 3-Point Hitch 99.3 in. — 