Bobcat CT2535 vs Bobcat CT4045 | Side-by-side comparison | ITC Resource Center
Compare Tractors
See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
Every published spec, side by side, including the details the graphs above don't chart.
Spec
BobcatCT2535
BobcatCT4045
PTO Power
29.4 hp
32.8 hp
Alternator
alternator
alternator
Air Cleaner
Dry type, replaceable
Not Published
Engine Type
Diesel
Diesel
Fuel System
Common Rail Direct Injection (CRDI)
Common rail direct injection
Displacement
111.4 in³
111.4 in³
Engine Model
Daedong 0.5 gal 3-cyl diesel
Daedong 3F183T
No. of Cylinders
3
3
Rated Engine Speed
2600 rpm
2600 rpm
Cooling System Type
Water cooled
Not Published
Engine Manufacturer
Daedong
Daedong
Engine Power (Gross)
34.9 hp
44.9 hp
Engine Emissions Constraints
Tier 4
Tier 4
Weight with ROPS and Loader
Not Applicable
Not Published
Weight with Cab and Loader
1652.00 KG
Not Applicable
Warranty Length & Coverage
24 months / 1,500 hours (whichever occurs first)
24 months / 1,500 hours (whichever occurs first)
Pump Type
NOT FOUND — no source explicitly names the pump type (e.g. gear, piston, etc.) for the CT2535. The Bobcat EU page lists 'Implement pump type · 26.00' but this appears to be a flow value (L/min), not a pump type descriptor.
Open Center, Gear
Steering Flow
16.90
4.94 gpm 18.7 lpm
Implement Flow
26.00
9.6 gal/min (36.5 Lpm)
Total Hydraulic Flow
11.4 gpm
16.5 gpm
Hydraulic System Type
NOT FOUND — no source explicitly labels a 'Hydraulic System Type' field for the CT2535. The EU Bobcat page lists 'Power steering pump (4 port)' and separate implement flow, suggesting an open-center or load-sensing split system, but no source uses that label explicitly.
open center
Rear Remote Hydraulic Flow
N/A
NOT FOUND
Overall Hydraulic Pump Flow
11.4 gpm
16.5 gpm
No. of Optional Remote Valves
2 Pairs
NOT FOUND
No. of Standard Remote Valves
Std. (4 port)
1 Pair Std (2nd Pair Opt)
PTO Rear
540 rpm
540 rpm
PTO Type
Independent
Independent
Lift Control Type
Hydraulic Position Control System
Hydraulic Position Control System
Hitch Lift Capacity
1631 lb.
2716 lb.
Mid-PTO Availability
Optional: 1988 rpm
Optional: 2119 rpm
Category, 3-Point Hitch
Category 1
Category 1
Hitch Lift Capacity (at 24”)
1,631 lb
2,716 lb
R3 Turf - Rear
41x14.0-20 R3
44X18-20
R3 Turf - Front
27x8.5-15 R3
29X12.5-15
Tire Size & Options
3,585 lb
Turf Tires, Industrial Tires, Agricultural Tires
R4 Industrial - Rear
15-19.5 R4
NOT FOUND
R4 Industrial - Front
25x8.5-14 R4
NOT FOUND
R1 Agricultural - Rear
11.2-24
13.6-24
R1 Agricultural - Front
7-16
8-16
Coolant Capacity
0.9 gal
6.7 (6.3) qts (L)
Crankcase Capacity
2 gal
6.4 (6.0) qts (L)
Fuel Tank Capacity
9.0 gal.
12.7 gal.
Front Axle Fluid Capacity
1.6 gal
Not Published
Transmission / Hydraulic System Capacity
5.8 gal
Not Published
Loader Model
FL8
FL9
Loader Lift Height
100 in.
104.6 in.
Loader Breakout Force
3285 lb.
4136 lb.
Quick Attach Loader System
Standard Quick Attach Mounting System
Standard Quick Attach Mounting System
Loader Lift Capacity (Full Height)
1389 lb.
1795 lb.
Clutch
Wet disc type
NOT FOUND — no source explicitly states clutch type (e.g., dry single-disc). SST requires clutch to shift gears; HST has no clutch pedal.
No. of Speeds
3 range
8F X 8R Synchro
Transmission Type
3-Range HST
3-Range HST
Max Travel Speed (Forward)
14.4 mph (23.1 km/hr.)
18.5 mph (29.7 km/hr.)
Max Travel Speed (Reverse)
10.1 mph (16.2 km/hr.)
12.9 mph (20.8 km/hr.)
Differential Lock & Limited Slip Options
Std
Std
Brakes
Wet Multi-disc
Wet Multi-disc
Steering
Hydrostatic Power Steering
Hydrostatic Power Steering
Frame Type
Not Published
4x4 MFWD 4WD
Front Axle Type
Manual (MEC)
NOT FOUND — no source explicitly labels a 'Front Axle Type' value for the CT4045
Drawbar Capacity
650.00 KG
NOT FOUND — no credible source reviewed lists an explicit drawbar capacity value for the CT4045
Front Axle Rating
Not Published
NOT FOUND — no source reviewed lists an explicit front axle rating (lb or kg) for the CT4045
Seat Suspension & Adjustability
Std
Suspension seat (standard); deluxe suspension seat available on select models - fully adjustable, foldable right-hand armrest
Wheelbase
65.7 in.
71.2 in.
Overall Width
63.0 in.
67.0 in.
Ground Clearance
12.3 in.
15.3 in.
Height to Top of ROPS
91.0 in.
97.4 in.
Height to Top of Cab Model
2520.00 MM
NOT FOUND — no cab model variant of the CT4045 was found in any source reviewed; all sources describe an open ROPS station
Height to Top of ROPS (folded)
Not Applicable
NOT FOUND — no source reviewed explicitly lists a folded ROPS height for the CT4045
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
