▶ EngineEngine Manufacturer Daedong Daedong Engine Model 3F-TM(H)4 3FT-TH4-U Engine Type 3-cylinder diesel Turbocharged diesel No. of Cylinders 3 3 Displacement 111.4 in³ 111.4 in³ Rated Engine Speed 2600 rpm 2750 rpm Engine Power (Gross) 39.6 hp 45 hp PTO Power 31.9 hp 33.9 hp Engine Emissions Constraints Tier 4 Tier 4 Cooling System Type Not Published Liquid-cooled Air Cleaner Not Published Not Published Fuel System Not Published Not Published Alternator Not Published Not Published ▶ HydraulicsPump Type Not Published Not Published Implement Flow 6.9 gpm 9.6 gpm Steering Flow 4.5 gpm 8.2 gpm Total Hydraulic Flow 11.4 gpm 17.8 gpm Overall Hydraulic Pump Flow 11.4 gpm 17.8 gpm Hydraulic System Type Not Published Not Published Rear Remote Hydraulic Flow Not Published Not Published No. of Standard Remote Valves 2 pairs 1 pair No. of Optional Remote Valves None additional; 2 pairs are standard 2 pairs (2nd and 3rd pairs optional) ▶ Fluid CapacityFuel Tank Capacity 9.0 gal 14.8 gal Coolant Capacity Not Published Not Published Crankcase Capacity Not Published Not Published Transmission / Hydraulic System Capacity Not Published Not Published Front Axle Fluid Capacity Not Published Not Published ▶ PTO & HitchPTO Type Independent Independent PTO Rear 540 rpm 540 rpm Mid-PTO Availability Optional, 1988 rpm Optional: 2103 rpm Category, 3-Point Hitch Category I Category I Hitch Lift Capacity Not Published Not Published Hitch Lift Capacity (at 24”) 1,631 lb 3,177 lb Lift Control Type Hydraulic position control Position with draft control ▶ Transmission & DrivetrainTransmission Type Hydrostatic (HST), 3-range 3-Range E-HST (electronic hydrostatic) No. of Speeds Infinite (3 ranges) Infinite forward and reverse Max Travel Speed (Forward) 14.0 mph 17.5 mph Max Travel Speed (Reverse) 9.7 mph 17.5 mph Clutch n/a (hydrostatic transmission) Not Published Differential Lock & Limited Slip Options Rear differential lock, standard Rear differential lock (standard) ▶ Chassis, Steering & ControlsFrame Type Not Published Not Published Steering Hydrostatic power steering Hydrostatic power steering Brakes Wet multi-disc Wet multi-disc Seat Suspension & Adjustability Adjustable seat with fully retractable seat belt Adjustable seat (standard) Front Axle Type 4WD Four-wheel drive (standard) Front Axle Rating Not Published Not Published Drawbar Capacity Not Published Not Published ▶ Dimensions & ManeuverabilityOverall Width 63.0 in 74.2 in (with industrial tires) Wheelbase 65.7 in 75.6 in Ground Clearance 12.3 in 13.0 in (with industrial tires) Min. Turn Radius without Brakes 106.3 in 117.6 in (with assisted braking) Height to Top of ROPS n/a (cab model) Not Applicable Height to Top of ROPS (folded) n/a (cab model) Not Applicable Height to Top of Cab Model 91.0 in 94.2 in Overall Length 120.9 in (with 3-point hitch) 139.6 in (with 3-point hitch) ▶ WeightTractor Weight (Base) 3,585 lb 4,685 lb (operating weight) Weight with ROPS and Loader n/a (cab model) Not Published Weight with Cab and Loader Not Published Not Published ▶ Tire OptionsTire Size & Options Agricultural, Turf, Industrial R1 Agricultural; R3 Turf; R4 Industrial R1 Agricultural - Front Not Published 8-16 R1 Agricultural - Rear Not Published 13.6-24 R3 Turf - Front Not Published 29-12.5-15 R3 Turf - Rear Not Published 21.5L-16.1 R4 Industrial - Front Not Published 10-16.5 R4 Industrial - Rear Not Published Not Published ▶ Loader & AttachmentsQuick Attach Loader System Standard quick attach mounting system Front-end loader with standard quick attach mounting system Loader Model FL8 FL9-5 Loader Lift Height 99.6 in (to pivot pin) 108.6 in (to pivot pin) Loader Lift Capacity (Full Height) 1,389 lb (at pivot pin) 2,346 lb Loader Breakout Force 3,285 lb (at pivot pin) 4,524 lbf (at pivot pin) ▶ WarrantyWarranty Length & Coverage Basic 24 months or 1,500 hours, defects in material and workmanship Basic 24 months or 1,500 hours; powertrain 48 months for consumer use, or 36 months or 2,000 hours for business use ▶ ITC Company AccessoriesAccessories that fit 
