▶ EngineEngine Manufacturer Daedong Mahindra Engine Model 3HT-TM4B Not Published Engine Type Turbocharged diesel Naturally aspirated direct-injection diesel No. of Cylinders 3 4 Displacement 111.4 in³ 166.7 in³ Rated Engine Speed 2750 rpm 2600 rpm Engine Power (Gross) 44.9 hp 44 hp PTO Power 32.8 hp 39 hp Engine Emissions Constraints Tier 4 Tier 4 Cooling System Type Liquid-cooled Not Published Air Cleaner Not Published Not Published Fuel System Not Published Direct injection Alternator Not Published OOS: 45 A, 12 V; Cab: 90 A, 12 V ▶ HydraulicsPump Type Not Published Not Published Implement Flow 9.6 gpm 8.2 gpm Steering Flow 6.9 gpm OOS: 4.1 gpm; Cab: 4.5 gpm Total Hydraulic Flow 16.5 gpm Not Published Overall Hydraulic Pump Flow 16.5 gpm Not Published Hydraulic System Type Open center Open Center with position control Rear Remote Hydraulic Flow Not Published Not Published No. of Standard Remote Valves 1 pair Not Published No. of Optional Remote Valves 1 pair (2nd pair optional) 1 spool optional ▶ Fluid CapacityFuel Tank Capacity 11.9 gal 9.0 gal Coolant Capacity Not Published Not Published Crankcase Capacity Not Published Not Published Transmission / Hydraulic System Capacity Not Published Not Published Front Axle Fluid Capacity Not Published Not Published ▶ PTO & HitchPTO Type Independent Independent PTO Rear 540 rpm 540 rpm @ 2650 rpm Mid-PTO Availability Optional: 2119 rpm Not Published Category, 3-Point Hitch Category I CAT I with check chains Hitch Lift Capacity Not Published 2,646 lb Hitch Lift Capacity (at 24”) 2,716 lb Not Published Lift Control Type Hydraulic Position Control System Not Published ▶ Transmission & DrivetrainTransmission Type 3-Range HST Synchro shuttle with partial synchromesh No. of Speeds Infinite forward and reverse (3-range) 12F/12R Max Travel Speed (Forward) 16.3 mph Not Published Max Travel Speed (Reverse) 15.9 mph Not Published Clutch Not Published Single plate, dry Differential Lock & Limited Slip Options Rear differential lock (standard) Not Published ▶ Chassis, Steering & ControlsFrame Type Not Published Not Published Steering Hydrostatic power steering Hydrostatic power steering, tilt Brakes Wet multi-disc Wet disc Seat Suspension & Adjustability Adjustable seat (standard) Not Published Front Axle Type Four-wheel drive (standard) Not Published Front Axle Rating Not Published Not Published Drawbar Capacity Not Published Not Published ▶ Dimensions & ManeuverabilityOverall Width 70.3 in (with industrial tires) 63.2 in Wheelbase 71.2 in Not Published Ground Clearance 15.3 in (with industrial tires) Not Published Min. Turn Radius without Brakes 116.1 in (with brake applied) 7.87 ft Height to Top of ROPS Not Applicable 94.4 in Height to Top of ROPS (folded) Not Applicable Not Published Height to Top of Cab Model 94.3 in 94.4 in Overall Length 125.5 in (with 3-point hitch) 119.3 in ▶ WeightTractor Weight (Base) 4,300 lb 3,285 lb (2545 Shuttle, operating weight); 3,506 lb (2545 Shuttle Cab, operating weight) Weight with ROPS and Loader Not Published Not Published Weight with Cab and Loader Not Published Not Published ▶ Tire OptionsTire Size & Options Not Published Not Published R1 Agricultural - Front 8-16 8.3x16 R1 Agricultural - Rear 13.6-24 12.4x24 R3 Turf - Front Not Published Not Published R3 Turf - Rear Not Published Not Published R4 Industrial - Front Not Published Not Published R4 Industrial - Rear Not Published Not Published ▶ Loader & AttachmentsQuick Attach Loader System Front-end loader with quick-tach mounting system Not Published Loader Model FL9-2 2545L (open station); 2545CL (cab) Loader Lift Height 103.0 in (to pivot pin) 2545L: 101.9 in; 2545CL: 101.9 in Loader Lift Capacity (Full Height) 1,858 lb (at pivot pin, max height) 2545L: 2,041 lb; 2545CL: 2,041 lb Loader Breakout Force 3,938 lb (at pivot point) 2545L: 3,430 lb; 2545CL: 3,430 lb ▶ WarrantyWarranty Length & Coverage Basic 24 months or 1,500 hours; powertrain 48 months for consumer use, or 36 months or 2,000 hours for business use Not Published ▶ ITC Company AccessoriesAccessories that fit None tagged yet 
