Bobcat CT5550 vs Bobcat CT1021 | Side-by-side comparison | ITC Resource Center
Compare Tractors
See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
24 months / 1,500 hours (whichever occurs first) - covers defects in material and workmanship
Pump Type
Not Published
Gear
Steering Flow
8.2 gpm
N/A
Implement Flow
9.6 gpm
6.5 gpm (24.5 Lpm)
Total Hydraulic Flow
17.8 gpm
7.2 gpm
Hydraulic System Type
Not Published
Open Center
Rear Remote Hydraulic Flow
Not Published
NOT FOUND
Overall Hydraulic Pump Flow
Not Published
7.2 gpm
No. of Optional Remote Valves
Not Published
1 Pair
No. of Standard Remote Valves
1
1
PTO Rear
Not Published
540 rpm
PTO Type
Independent
Independent
Lift Control Type
Not Published
Hydraulic Position Control System
Hitch Lift Capacity
3,177 lb
700 lb.
Mid-PTO Availability
Not Published
Standard: 2200 rpm
Category, 3-Point Hitch
Wet multi-disc
Category 1 Limited
Hitch Lift Capacity (at 24”)
3,177 lb
700 lb
R3 Turf - Rear
Not Published
26X12.00-12
R3 Turf - Front
Not Published
18X8.5-10
Tire Size & Options
Not Published
Front AG. (TURF, INDUSTRIAL) 18X8.5-10; Rear AG. (TURF, INDUSTRIAL) 26X12.00-12
R4 Industrial - Rear
Not Published
26X12.00-12
R4 Industrial - Front
Not Published
18X8.5-10
R1 Agricultural - Rear
Not Published
26X12.00-12
R1 Agricultural - Front
Not Published
18X8.5-10
Coolant Capacity
Not Published
2.0 (1.9) qts (L)
Crankcase Capacity
Not Published
5.2 (4.9) qts (L)
Fuel Tank Capacity
14.8 gal
6.7 gal.
Front Axle Fluid Capacity
Not Published
NOT FOUND
Transmission / Hydraulic System Capacity
Not Published
NOT FOUND
Loader Lift Height
Not Published
71.9 in.
Loader Breakout Force
Not Published
1554 lb.
Quick Attach Loader System
Not Published
Standard Quick Attach Mounting System
Loader Lift Capacity (Full Height)
Not Published
608 lb.
Loader Model
n/a
FL6
Clutch
17.5 mph (28.2 km/hr)
Clutch-free (Hydrostatic)
No. of Speeds
75.6 in
2
Transmission Type
Not Published
2-Range HST
Max Travel Speed (Forward)
Not Applicable
11.1 mph (17.8 km/hr.)
Max Travel Speed (Reverse)
17.5 mph (28.2 km/hr)
7.6 mph (12.2 km/hr.)
Differential Lock & Limited Slip Options
Not Applicable
Std
Brakes
Not Published
Wet Multi-disc
Steering
2346 lb
Hydrostatic Power Steering
Frame Type
Std
Not Published
Front Axle Type
Wet Multi-Disc
Not Published
Drawbar Capacity
Standard
7.7 kN / 1730 lb
Front Axle Rating
Enclosed cab w/ heat and air conditioning (Standard)
Not Published
Seat Suspension & Adjustability
Hydrostatic power steering
Suspension Seat ■
Wheelbase
Not Published
55.1 in.
Overall Width
Not Published
46.0 in.
Ground Clearance
139.6 in
6.3 in.
Height to Top of ROPS
Not Published
87.6 in.
Height to Top of Cab Model
Not Published
NOT FOUND — no source lists a cab-model height. The CT1021 is an open-station (two-post folding ROPS) machine; a Field Cab is a dealer-installed option only, and no cab height spec was found in any source.
Height to Top of ROPS (folded)
Not Published
NOT FOUND — no source explicitly lists the folded ROPS height. The only height figure available across all sources is Height (ROPS) [upright]: 87.6 in (2225 mm)
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
