Case IH Farmall Compact 25A vs LS Tractor MT125 | Side-by-side comparison | ITC Resource Center
Compare Tractors
See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
Every published spec, side by side, including the details the graphs above don't chart.
Spec
Case IHFarmall Compact 25A
LS TractorMT125
PTO Power
19.2 hp
17.2 hp
Alternator
Not Published
40 A, 12 V
Air Cleaner
Not Published
Dry
Engine Type
Diesel, naturally aspirated
3-cylinder, Indirect-injection, Water-cooled
Fuel System
Not Published
Indirect Injection
Displacement
79.3 in³
77.3 in³
No. of Cylinders
3
3
Rated Engine Speed
2500 rpm
3000 rpm
Cooling System Type
Not Published
Water-cooled
Engine Manufacturer
Not Published
Yanmar
Engine Power (Gross)
24.6 hp
24.7 hp
Engine Emissions Constraints
Tier 4
Tier 4
Weight with ROPS and Loader
Not Published
1444 lb
Weight with Cab and Loader
Not Published
Not Published
Tractor Weight (Base)
n/a
1,444 lbs
Warranty Length & Coverage
Not Published
6-Year Limited Warranty
Pump Type
Not Published
Gear pump type, Transmission drive
Steering Flow
Not Published
2.1 gpm
Implement Flow
7.9 gpm
4.6 gpm
Total Hydraulic Flow
Not Published
6.7 gpm
Hydraulic System Type
Open center
Open center system, Position control
Rear Remote Hydraulic Flow
0 (standard) / 1 (optional) (DIA)
NOT FOUND — No source explicitly lists a dedicated 'Rear Remote Hydraulic Flow' spec. The closest published figure is the implement pump flow of 4.6 gpm, but no source labels this specifically as 'Rear Remote' flow.
Overall Hydraulic Pump Flow
Not Published
6.7 gpm
No. of Optional Remote Valves
1
1 Set
No. of Standard Remote Valves
0
0 (optional)
System Operating Pressure
n/a
12.7~13.2 MPa (1849~1920 psi)
PTO Rear
540 rpm
540 rpm
PTO Type
Not Published
Independent
Lift Control Type
Not Published
Position Control
Hitch Lift Capacity
1,433 lb @ 24 in behind pin
970 lbs. (At 24 in: 728)
Mid-PTO Availability
Optional mid-PTO (2,000 rpm)
Standard (2,500 rpm)
Category, 3-Point Hitch
Category 1
Category 1
Hitch Lift Capacity (at 24”)
1,433 lb @ 24 in behind pin
728 lb
R3 Turf - Rear
Not Published
26x12.0-12 4PR HSR82 (Turf)
R3 Turf - Front
Not Published
18x8.50-10 4PR HS482 (Turf)
Tire Size & Options
Not Published
Industrial Front/Rear 18×18.5 - 10/26 x 12.0 - 12; Versa Turf Front/Rear: 18×18.5 - 10/26 x 12.0 - 12
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
