▶ EngineEngine Manufacturer Yanmar Yanmar Engine Model 3TNV82A-BMJK 3TNV88F-EPJPT Engine Type 3-cylinder liquid-cooled diesel 4-cycle, inline, water-cooled diesel, naturally aspirated No. of Cylinders 3 3 Displacement 81.2 in³ 100.2 in³ Rated Engine Speed 2600 rpm 2400 rpm Engine Power (Gross) 26.5 hp 24.4 hp PTO Power 20.5 hp 20.7 hp Engine Emissions Constraints Not Published Tier 4 Cooling System Type Liquid-cooled Liquid Air Cleaner Dry type, two stage Dry Fuel System Not Published Direct injection Alternator 20 A 55 A, 12 V ▶ HydraulicsPump Type Not Published 2 single-section external gear pumps, 1 on each side of the engine timing-gear cover Implement Flow 5.0 gpm 5.1 gpm Steering Flow 5.5 gpm 3.8 gpm Total Hydraulic Flow 10.5 gpm 8.5 gpm Overall Hydraulic Pump Flow 10.5 gpm 8.9 gpm Hydraulic System Type Not Published Open center Rear Remote Hydraulic Flow Not Published Not Published No. of Standard Remote Valves 2 None No. of Optional Remote Valves Not Published Up to two (optional) ▶ Fluid CapacityFuel Tank Capacity 7.1 gal 9.7 gal Coolant Capacity 4.1 qt 1.18 gal Crankcase Capacity 3.0 qt 1.1 gal Transmission / Hydraulic System Capacity 3.9 gal 9.24 gal Front Axle Fluid Capacity 3.6 qt 1.0 gal ▶ PTO & HitchPTO Type Independent Not Published PTO Rear 540 rpm (rear PTO standard) 540 rpm at 2400 rpm engine (rated) Mid-PTO Availability Standard Not Published Category, 3-Point Hitch Category 1 Category I Hitch Lift Capacity 1,433 lb Not Published Hitch Lift Capacity (at 24”) 1,150 lb 1,670 lb Lift Control Type Position control Position control ▶ Transmission & DrivetrainTransmission Type 2-range hydrostatic 8F/8R gear drive transmission No. of Speeds Infinite forward and reverse, 2 ranges 8F/8R Max Travel Speed (Forward) 13.0 mph 11.1 mph Max Travel Speed (Reverse) 13.0 mph Not Published Clutch Not Published Not Published Differential Lock & Limited Slip Options Not Published Not Published ▶ Chassis, Steering & ControlsFrame Type Folding ROPS standard Not Published Steering Power steering Power steering Brakes Wet disk Not Published Seat Suspension & Adjustability Not Published Not Published Front Axle Type MFWD, standard, all ranges, on-the-go engagement MFWD (4WD) Front Axle Rating 1,940 lb Not Published Drawbar Capacity Not Published 1,102 lb ▶ Dimensions & ManeuverabilityOverall Width 51.0 in (minimum, standard tires) 57.3 in Wheelbase 65.2 in 62 in Ground Clearance 13 in (front axle); 11 in (rear axle drawbar) 14 in Min. Turn Radius without Brakes 8.2 ft 6.9 ft (with brake applied) Height to Top of ROPS 90 in Not Published Height to Top of ROPS (folded) 68.9 in Not Published Height to Top of Cab Model Not Published Not Published Overall Length 108.9 in (with 3-point hitch) 111.2 in ▶ WeightTractor Weight (Base) 1,865 lb (with all fluids) 2,778 lb Weight with ROPS and Loader Not Published Not Published Weight with Cab and Loader Not Published Not Published ▶ Tire OptionsTire Size & Options R3 turf standard (24x8.5-14 front, 36x14.00-15 rear); R4 industrial optional (23x8.5-12 front, 14-17.5 rear) R1 Bar, R3 Turf, R4 Industrial R1 Agricultural - Front Not Published 7-14 R1 Agricultural - Rear Not Published 11.2-24 R3 Turf - Front 24x8.5-14 27X8.50-15 R3 Turf - Rear 36x14.00-15 41X14-20 R4 Industrial - Front 23x8.5-12 25X8.50-14 R4 Industrial - Rear 14-17.5 15-19.5 ▶ Loader & AttachmentsQuick Attach Loader System Tool-free attach-and-park mounting; 200CX attaches and detaches in under 3 minutes Quick-change attachment carrier Loader Model 200X; 200CX 300E Loader Lift Height 200CX: 78.5 in 84.0 in (at pivot pin) Loader Lift Capacity (Full Height) 200CX: 800 lb (at full height, measured at pivot) 1,186 lb (at pivot pin) Loader Breakout Force 200CX: 2,239 lbf (at pin) 1,704 lb (at pivot pin) ▶ WarrantyWarranty Length & Coverage 3-year / 2,000-hour limited warranty (as sold new) Basic 24 months or 2,000 hours; powertrain 72 months or 2,000 hours 