▶ EngineEngine Manufacturer Yanmar Yanmar Engine Model 3TNV82A-BMJK 3TNV88F-EPJT2 Engine Type 3-cylinder liquid-cooled diesel Diesel, naturally aspirated, direct injection No. of Cylinders 3 3 Displacement 81.2 in³ 95.7 in³ Rated Engine Speed 2600 rpm 2400 rpm Engine Power (Gross) 26.5 hp 24.4 hp PTO Power 20.5 hp 17.4 hp Engine Emissions Constraints Not Published Tier 4 Cooling System Type Liquid-cooled Water pump Air Cleaner Dry type, two stage Dry type with safety element Fuel System Not Published Direct injection Alternator 20 A 55 A, 12 V ▶ HydraulicsPump Type Not Published Implement/steering pump: Tandem gear; hydrostatic pump: PV axial piston Implement Flow 5.0 gpm 5.3 gpm Steering Flow 5.5 gpm 4.0 gpm Total Hydraulic Flow 10.5 gpm 9.3 gpm Overall Hydraulic Pump Flow 10.5 gpm 9.3 gpm Hydraulic System Type Not Published Open center Rear Remote Hydraulic Flow Not Published Not Published No. of Standard Remote Valves 2 Not Published No. of Optional Remote Valves Not Published Up to 2 (optional) ▶ Fluid CapacityFuel Tank Capacity 7.1 gal 7.5 gal Coolant Capacity 4.1 qt 1.3 gal Crankcase Capacity 3.0 qt 4.5 qt Transmission / Hydraulic System Capacity 3.9 gal 5.5 gal Front Axle Fluid Capacity 3.6 qt 1.0 gal ▶ PTO & HitchPTO Type Independent Not Published PTO Rear 540 rpm (rear PTO standard) 540 rpm Mid-PTO Availability Standard Not Published Category, 3-Point Hitch Category 1 Category I Hitch Lift Capacity 1433 lb 1,356 lb @ 24 in behind link arms Hitch Lift Capacity (at 24”) 1150 lb 1356 lb Lift Control Type Position control Not Published ▶ Transmission & DrivetrainTransmission Type 2-range hydrostatic Hydrostatic transmission (HST) No. of Speeds Infinite forward and reverse, 2 ranges Not Published Max Travel Speed (Forward) 13.0 mph Not Published Max Travel Speed (Reverse) 13.0 mph Not Published Clutch Not Published Not Published Differential Lock & Limited Slip Options Not Published Not Published ▶ Chassis, Steering & ControlsFrame Type Folding ROPS standard Open operator station (OOS) Steering Power steering Hydrostatic Brakes Wet disk Wet disc Seat Suspension & Adjustability Not Published Not Published Front Axle Type Mechanical front wheel drive (MFWD), standard, all ranges, engages on the go 4WD (MFWD) Front Axle Rating 1940 lb 1760 lb Drawbar Capacity Not Published 880 lb ▶ Dimensions & ManeuverabilityOverall Length with 3-Point Hitch 108.9 in 115.9 in Overall Width 51.0 in (minimum, standard tires) 56.9 in (min. rear tread, standard R1 tires); 61.7 in (max. rear tread, larger R4 tires) Wheelbase 65.2 in 62.8 in Ground Clearance 13 in (front axle); 11 in (rear axle drawbar) 12.7 in (R4 tires) Min. Turn Radius without Brakes 8.2 ft 9.4 ft (2.9 m) Height to Top of ROPS 90 in 95.3 in Height to Top of ROPS (folded) 68.9 in Not Published Height to Top of Cab Model Not Published Not Published ▶ WeightTractor Weight (Base) 1865 lb 2266 lb Weight with ROPS and Loader Not Published 2972 lb Weight with Cab and Loader Not Published Not Published ▶ Tire OptionsTire Size & Options R3 turf standard (24x8.5-14 front, 36x14.00-15 rear); R4 industrial optional (23x8.5-12 front, 14-17.5 rear) R1 Bar, R3 Turf, R4 Industrial R1 Agricultural - Front Not Published 7-14 R1 Agricultural - Rear Not Published 11.2-24 R3 Turf - Front 24x8.5-14 27X8.50-15 R3 Turf - Rear 36x14.00-15 41X14-20 R4 Industrial - Front 23x8.5-12 25X8.50-14 or 27X8.50-15 R4 Industrial - Rear 14-17.5 15.00-19.5 or 43X16-20 ▶ Loader & AttachmentsQuick Attach Loader System Quik-Park loader mounting; 200CX attaches and detaches in under 3 minutes with no tools Quick-change attachment carrier Loader Model 200CX D160 Loader Lift Height 200CX: 78.5 in 84 in Loader Lift Capacity (Full Height) 200CX: 800 lb (at full height, measured at pivot) 1,186 lb Loader Breakout Force 200CX: 2239 lbf (at pin) 1,704 lb ▶ WarrantyWarranty Length & Coverage 3-year / 2,000-hour limited warranty (as sold new) 6-year/2,000-hour powertrain; 2-year/2,000-hour basic (full machine) 