▶ EngineEngine Manufacturer Yanmar KIOTI Engine Model 3TNV88F-EPJT2 CX2510, CX2510 HST: 3A165LWH-U2; CX2510 HST CAB: 3A165LWH-U3 Engine Type Diesel, naturally aspirated, direct injection 3 Cylinder, In-Line Vertical, Water-Cooled 4-Cycle Turbo Diesel No. of Cylinders 3 3 Displacement 95.7 in³ 100.5 in³ Rated Engine Speed 2400 rpm 2600 rpm Engine Power (Gross) 24.4 hp 24.5 hp PTO Power 17.4 hp CX2510: 19.3 hp; CX2510 HST, CX2510 HST CAB: 18.8 hp Engine Emissions Constraints Tier 4 Not Published Cooling System Type Water pump Water-cooled Air Cleaner Dry type with safety element Not Published Fuel System Direct injection Diesel fuel (ultra-low sulfur diesel, sulfur content: 15 ppm or less) Alternator 55 A, 12 V Not Published ▶ HydraulicsPump Type Implement/steering pump: Tandem gear; hydrostatic pump: PV axial piston Gear Implement Flow 5.3 gpm 6.86 gpm Steering Flow 4.0 gpm 4.46 gpm Total Hydraulic Flow 9.3 gpm 11.3 gpm Overall Hydraulic Pump Flow 9.3 gpm 11.3 gpm Hydraulic System Type Open center open center Rear Remote Hydraulic Flow Not Published Not Published No. of Standard Remote Valves Not Published CX2510, CX2510 HST: 0; CX2510 HST CAB: 1 No. of Optional Remote Valves Up to 2 (optional) CX2510, CX2510 HST: 1 ▶ Fluid CapacityFuel Tank Capacity 7.5 gal 6.6 gal Coolant Capacity 1.3 gal 2.06 gal Crankcase Capacity 4.5 qt 1.53 gal Transmission / Hydraulic System Capacity 5.5 gal CX2510: 6.20 gal; CX2510 HST: 5.42 gal Front Axle Fluid Capacity 1.0 gal 0.8 gal ▶ PTO & HitchPTO Type Not Published CX2510: Transmission; CX2510 HST, CX2510 HST CAB: Live PTO Rear 540 rpm 540 rpm Mid-PTO Availability Not Published CX2510, CX2510 HST: 2,000 rpm (optional); CX2510 HST CAB: 2,000 rpm (standard) Category, 3-Point Hitch Category I Category I Hitch Lift Capacity 1,356 lb @ 24 in behind link arms 1,629 lb Hitch Lift Capacity (at 24”) 1356 lb 1,203 lb Lift Control Type Not Published Position control ▶ Transmission & DrivetrainTransmission Type Hydrostatic transmission (HST) CX2510: Manual; CX2510 HST, CX2510 HST CAB: Hydrostatic No. of Speeds Not Published CX2510: 6F/2R; CX2510 HST, CX2510 HST CAB: Infinite, 2 range Max Travel Speed (Forward) Not Published CX2510: 10.8 mph; CX2510 HST, CX2510 HST CAB: 10.7 mph Max Travel Speed (Reverse) Not Published CX2510: 4.2 mph; CX2510 HST, CX2510 HST CAB: 7.46 mph Clutch Not Published Dry single Differential Lock & Limited Slip Options Not Published Rear differential lock (standard) ▶ Chassis, Steering & ControlsFrame Type Open operator station (OOS) Not Published Steering Hydrostatic Hydrostatic power steering Brakes Wet disc Wet disc Seat Suspension & Adjustability Not Published Adjustable seat with dual armrests Front Axle Type 4WD (MFWD) 4WD, mechanical engagement Front Axle Rating 1760 lb Not Published Drawbar Capacity 880 lb Not Published ▶ Dimensions & ManeuverabilityOverall Length with 3-Point Hitch 115.9 in CX2510, CX2510 HST: 109.8 in; CX2510 HST CAB: 111.0 in Overall Width 56.9 in (min. rear tread, standard R1 tires); 61.7 in (max. rear tread, larger R4 tires) 49.4 in Wheelbase 62.8 in 59.8 in Ground Clearance 12.7 in (R4 tires) 13.4 in Min. Turn Radius without Brakes 9.4 ft (2.9 m) 9.0 ft (with brake applied) Height to Top of ROPS 95.3 in 82.8 in Height to Top of ROPS (folded) Not Published Not Published Height to Top of Cab Model Not Published 86.6 in ▶ WeightTractor Weight (Base) 2266 lb CX2510, CX2510 HST: 2,308 lb; CX2510 HST CAB: 2,804 lb Weight with ROPS and Loader 2972 lb Not Published Weight with Cab and Loader Not Published Not Published ▶ Tire OptionsTire Size & Options R1 Bar, R3 Turf, R4 Industrial Front AG 7.0-12 (Turf 23x8.5-12, Industrial 23x8.5-12); Rear AG 11.2-16 (Turf 33x12.5-16.5, Industrial 12-16.5) R1 Agricultural - Front 7-14 7.0-12 R1 Agricultural - Rear 11.2-24 11.2-16 R3 Turf - Front 27X8.50-15 23x8.5-12 R3 Turf - Rear 41X14-20 33x12.5-16.5 R4 Industrial - Front 25X8.50-14 or 27X8.50-15 23x8.5-12 R4 Industrial - Rear 15.00-19.5 or 43X16-20 12-16.5 ▶ Loader & AttachmentsQuick Attach Loader System Quick-change attachment carrier Quick attach bucket, 50 in (KL2510) Loader Model D160 KL2510 Loader Lift Height 84 in KL2510: 87.8 in Loader Lift Capacity (Full Height) 1,186 lb KL2510: 1,092 lb Loader Breakout Force 1,704 lb KL2510: 1,843 lb ▶ WarrantyWarranty Length & Coverage 6-year/2,000-hour powertrain; 2-year/2,000-hour basic (full machine) 24 months unlimited hours, parts and labor (non-commercial); powertrain 72 months unlimited hours, parts and labor ▶ ITC Company AccessoriesAccessories that fit None tagged yet 
