▶ EngineEngine Manufacturer Yanmar Mitsubishi Engine Model 3TNV86CT-NJT2 K38 Engine Type Diesel 3-cylinder turbocharged and intercooled diesel No. of Cylinders 3 3 Displacement 95.7 in³ 101 in³ Rated Engine Speed 2500 rpm 2500 rpm Engine Power (Gross) 36.7 hp 36.2 hp PTO Power 30 hp Gear: 27.5 hp; HST: 26.3 hp Engine Emissions Constraints Not Published Tier 4 Cooling System Type Water pump Liquid-cooled Air Cleaner Dry type with safety element Not Published Fuel System Not Published Common-rail, direct injection, electronic engine management Alternator 55 A, 12 V Not Published ▶ HydraulicsPump Type Tandem gear pump; hydrostatic pump: PV axial-piston pump Engine-driven gear-type pump Implement Flow 5.3 gpm 11.6 gpm Steering Flow 4.0 gpm 6.8 gpm Total Hydraulic Flow 9.3 gpm Not Published Overall Hydraulic Pump Flow 9.3 gpm Not Published Hydraulic System Type Open center Open center Rear Remote Hydraulic Flow Not Published 11.6 gpm No. of Standard Remote Valves Not Published Not Published No. of Optional Remote Valves Up to 2 (optional) Not Published ▶ Fluid CapacityFuel Tank Capacity 7.5 gal 10.6 gal Coolant Capacity 5.5 qt Not Published Crankcase Capacity 4.5 qt Not Published Transmission / Hydraulic System Capacity 22 qt Not Published Front Axle Fluid Capacity 4 qt Not Published ▶ PTO & HitchPTO Type Independent Independent, electro-hydraulically engaged PTO Rear 540 rpm 540 rpm (1-3/8 in 6-spline) Mid-PTO Availability Not available Optional, 2000 rpm Category, 3-Point Hitch Category I Category I Hitch Lift Capacity Not Published Not Published Hitch Lift Capacity (at 24”) 1,356 lb 2,535 lb Lift Control Type Position control Position control; draft control optional ▶ Transmission & DrivetrainTransmission Type Hydrostatic transmission (HST) 12x12 power shuttle (4 gears, 3 ranges) or 3-range electronic Servo-HST No. of Speeds Not Published Power shuttle: 12F / 12R; Servo-HST: 3-range infinite Max Travel Speed (Forward) Not Published Not Published Max Travel Speed (Reverse) Not Published Not Published Clutch Not Published Wet multi-disc (power shuttle) Differential Lock & Limited Slip Options Differential lock: Yes Mechanical engagement via heel pedal ▶ Chassis, Steering & ControlsFrame Type Not Published Drop-axle rear with bull gear final drives Steering Power steering Power steering, tilt steering wheel Brakes Wet disk Internal wet disc brakes, independent foot pedals Seat Suspension & Adjustability Not Published Suspended seat with armrests and seat belt (vinyl on ROPS, cloth on cab) Front Axle Type Not Published Cast-steel 4WD front axle, center driveline, bevel-gear final drives Front Axle Rating 1,760 lb Not Published Drawbar Capacity 880 lb (maximum vertical load) Not Published ▶ Dimensions & ManeuverabilityOverall Width 56.9 in (min. rear tread, standard R1 tires); 61.7 in (max. rear tread, larger R4 tires) 64.2 in Wheelbase 62.8 in 69.7 in Ground Clearance 12.7 in (R4 tires) Not Published Min. Turn Radius without Brakes Not Published Not Published Height to Top of ROPS 95.3 in Not Published Height to Top of ROPS (folded) Not Published Not Published Height to Top of Cab Model Not Published 91.3 in Overall Length 115.9 in (with 3-point hitch) 122.0 in ▶ WeightTractor Weight (Base) 2,222 lb ROPS: 3,362 lb; Cab: 3,803 lb Weight with ROPS and Loader 2,972 lb Not Published Weight with Cab and Loader Not Published Not Published ▶ Tire OptionsTire Size & Options R1 Bar, R3 Turf, R4 Industrial Ag: 8-16 front, 12.4-24 rear (13.6-24 optional); turf: 27x8.50-15 front, 41x14.00-20 rear; industrial: 10-16.5 front, 17.5L-24 rear (also 250/75R16 front, 400/80R24 rear) R1 Agricultural - Front 7-14 8-16 R1 Agricultural - Rear 11.2-24 12.4-24 (13.6-24 optional) R3 Turf - Front 27X8.50-15 27x8.50-15 R3 Turf - Rear 41X14-20 41x14.00-20 R4 Industrial - Front 25X8.50-14 or 27X8.50-15 10-16.5 or 250/75R16 R4 Industrial - Rear 15.00-19.5 or 43X16-20 17.5L-24 or 400/80R24 ▶ Loader & AttachmentsQuick Attach Loader System Quick-change attachment carrier DL125: universal skid steer or exclusive compact quick-attach implement tool carrier Loader Model 300E DL125 Loader Lift Height 84 in (at pivot pin) DL125: 102.4 in (at pivot pin) Loader Lift Capacity (Full Height) 1,186 lb (at pivot pin) DL125: 1,840 lb (at pivot pin, full height) Loader Breakout Force 1,704 lbf (at pivot pin) DL125: 2,190 lb (at pivot pin) ▶ WarrantyWarranty Length & Coverage Basic 2 years or 2,000 hours; powertrain 6 years or 2,000 hours 5-year powertrain warranty 