▶ EngineEngine Manufacturer Yanmar Yanmar Engine Model 3TNV84T-BMJT 3TNV88-CR Engine Type 3-cylinder liquid-cooled diesel, direct injection Natural aspiration No. of Cylinders 3 3 Displacement 91.5 in³ 100.2 in³ Rated Engine Speed 2600 rpm 3000 rpm Engine Power (Gross) 37.2 hp 37.4 hp PTO Power 30 hp 30.2 hp Engine Emissions Constraints Not Published Tier 4 Cooling System Type Liquid-cooled Liquid-cooled Air Cleaner Dry type with safety element Dual dry Fuel System Direct injection, self bleeding, in-line fuel pump with electric shutoff Common Rail Direct Injection Alternator 40 A 70 A, 12 V ▶ HydraulicsPump Type Dual tandem gear pump Dual gear pump Implement Flow 8.6 gpm 6.4 gpm Steering Flow 5.3 gpm 4.6 gpm Total Hydraulic Flow 13.9 gpm 11.0 gpm Overall Hydraulic Pump Flow 13.9 gpm 6.4 gpm Hydraulic System Type Open center Not Published Rear Remote Hydraulic Flow Not Published Not Published No. of Standard Remote Valves Not Published 1 No. of Optional Remote Valves Not Published 1 ▶ Fluid CapacityFuel Tank Capacity 13.5 gal (open station); 11.8 gal (cab) 9.0 gal Coolant Capacity 5.6 qt (open station); 7.4 qt (cab) 7.4 qt Crankcase Capacity 5.1 qt 6.0 qt Transmission / Hydraulic System Capacity 6.8 gal (eHydro); 6.3 gal (PowrReverser) 9.25 gal Front Axle Fluid Capacity 1.2 gal 8.7 qt ▶ PTO & HitchPTO Type Independent Independent PTO Rear 540 rpm 540 rpm Mid-PTO Availability Optional, 2100 rpm No mid-PTO offered Category, 3-Point Hitch Category 1 Category I Hitch Lift Capacity Not Published 2,646 lb Hitch Lift Capacity (at 24”) 2200 lb 1,764 lb Lift Control Type Position control Position ▶ Transmission & DrivetrainTransmission Type eHydro 3-range hydrostatic (4WD); PowrReverser 12F/12R power shuttle (4WD) 12F/12R Syncro Shuttle No. of Speeds Infinite forward and reverse, 3 ranges (eHydro); 12 forward, 12 reverse (PowrReverser) 12 forward, 12 reverse Max Travel Speed (Forward) 19 mph (eHydro); 16.4 mph (PowrReverser) 15.0 mph Max Travel Speed (Reverse) 19 mph (eHydro); 16.4 mph (PowrReverser) Not Published Clutch Multiple stage wet disc, 4.4 in (PowrReverser) Single plate dry clutch (8.86 in diameter); hydraulic clutch assembly for Independent PTO models Differential Lock & Limited Slip Options Mechanical rear differential lock 4WD, differential lock ▶ Chassis, Steering & ControlsFrame Type Two-post folding ROPS; cab optional; MFWD standard Transmission case, clutch housing, engine and front axle support bolted together to form a rigid unit Steering Hydrostatic power steering Hydrostatic power steering Brakes Wet disk Wet disc Seat Suspension & Adjustability Not Published Suspension seat with armrests and retractable seat belt, standard Front Axle Type Mechanical front wheel drive (MFWD), standard, all ranges Center-pivot, reverse Elliot type (4WD) Front Axle Rating 1587 to 3197 lb Not Published Drawbar Capacity 562 lb Not Published ▶ Dimensions & ManeuverabilityOverall Length with 3-Point Hitch 120.2 in 128 in Overall Width 52.4 in (minimum, R1 tires); 68.4 in (maximum, R1 tires) 58.0 in Wheelbase 68 in 64.5 in Ground Clearance 12.2 in (rear axle) 12.8 in Min. Turn Radius without Brakes Not Published 116 in Height to Top of ROPS 93.3 in Not Published Height to Top of ROPS (folded) Not Published Not Published Height to Top of Cab Model 89.4 in 92.5 in ▶ WeightTractor Weight (Base) 2900 lb (open station); 3570 lb (cab) 3,417 lb Weight with ROPS and Loader Not Published Not Published Weight with Cab and Loader Not Published Not Published ▶ Tire OptionsTire Size & Options R1 bar tread, R3 turf, R4 industrial and golf tires available on all models Titan (USA): R4 Industrial (Std), R1 Agricultural (Opt), R3 Turf (Opt) R1 Agricultural - Front 7.00-14 7-16 R1 Agricultural - Rear 11.2-24 11.2x24 R3 Turf - Front 27x8.50-15 28x8.5-15 R3 Turf - Rear 41x14.00-20 41x14-20 R4 Industrial - Front 25x8.50-14 or 27x8.50-15 10-16.5 R4 Industrial - Rear 43x16.00-20 or 15.00-19.5 43x16-20 ▶ Loader & AttachmentsQuick Attach Loader System John Deere quick-attach (Quik-Park); skid-steer style carrier optional on 300CX L102: Skid-steer compatible quick-attach Loader Model 300X; 300CX; H160; H165; 300R; 320R L102 Loader Lift Height 300X: 90 in; 300CX: 102 in; H160: 90 in; H165: 102 in; 300R: 90 in; 320R: 102 in L102: 102 in Loader Lift Capacity (Full Height) 300X: 1360 lb; 300CX: 1598 lb; H160: 1360 lb; H165: 1598 lb; 300R: 1360 lb; 320R: 1598 lb (to maximum height at pivot pin) L102: 2,116 lb at pivot pin to full height Loader Breakout Force 300X: 2855 lbf; 300CX: 3327 lbf; H160: 2855 lbf; H165: 3327 lbf; 300R: 2855 lbf; 320R: 3327 lbf (at pivot pin) L102: 3,435 lb at pivot pin ▶ WarrantyWarranty Length & Coverage Not Published 2-year full machine warranty; 8-year, 3,000-hour powertrain warranty (no deductible, parts and labor) ▶ ITC Company AccessoriesAccessories that fit None tagged yet 
