John Deere 5090R vs John Deere 5520 | Side-by-side comparison | ITC Resource Center
Compare Tractors
See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
Open center (standard); closed center PFC (optional)
Open center
Rear Remote Hydraulic Flow
19.3 gpm (open center); 26.4 gpm (PFC)
15.9 gpm
No. of Standard Remote Valves
2 rear and 2 mid (stackable)
2 to 3 rear
No. of Optional Remote Valves
Mid and front SCVs optional; up to 3 rear
Not Published
Fuel Tank Capacity
38 gal
22 gal (straddle mount, early model); 25 gal (straddle mount, late model); 27 gal (IOOS or cab, small filler neck); 29.5 gal (IOOS or cab, large filler neck)
Coolant Capacity
4.25 gal
11.4 qt
Crankcase Capacity
3.1 gal
9 qt
Transmission / Hydraulic System Capacity
11.75 gal (open center); 12.5 gal (closed center PFC)
10 gal (CollarShift and SyncShuttle, dry clutch); 11.5 gal (PowrReverser, wet clutch)
Front Axle Fluid Capacity
1.3 gal (MFWD differential housing); 0.2 gal (each wheel hub)
Category II (telescoping draft links with Category II balls)
Category I and II
Hitch Lift Capacity
7158 lb; 8157 lb throughout lift range at hitch ball; 11122 lb / 12515 lb maximum
Not Published
Hitch Lift Capacity (at 24”)
6975 lb; 7868 lb throughout lift range
3374 lb
Lift Control Type
Electro-hydraulic hitch with fender controls, lower link draft sensing
Top link draft sensing
Transmission Type
CommandQuad manual 16F/16R standard (electronic range and gear shifting, AutoClutch); CommandQuad manual with creeper optional; Command8 32F/16R optional
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
