John Deere 6120M vs Massey Ferguson 6712 | Side-by-side comparison | ITC Resource Center
Compare Tractors
See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
2-piece front axle (types 730/733/735): axle housing 1.69 gal (suspended axle) or 1.43 gal (axle without suspension); final drive per side 0.21 gal (without brake), 0.37 gal (with brake). 3-piece front axle version 1 (type 740 M40): axle housing 1.90 gal; final drive per side 0.21 gal (without brake), 0.37 gal (with brake). 3-piece front axle version 2 (types 730/733/735): axle housing 1.7 gal; final drive per side 0.21 gal (without brake), 0.47 gal (with brake)
Not Published
PTO Type
Electro-hydraulically operated, oil cooled, multi-disc; standard 1.5 in 540/1000 reversible shaft
Independent, electro-hydraulic engagement via switch
176.6 in (basic 242.5 lb front weight, cab + MFWD, to draft link in horizontal position)
Not Published
Overall Width
100.4 in (maximum width for road travel)
64.8 in
Wheelbase
94.5 in
98.4 in
Ground Clearance
Front-wheel drive axle: 11.3-25.1 in depending on front tire SRI; differential housing with drawbar: 13.7-23.5 in depending on rear tire SRI (cab + MFWD)
Not Published
Min. Turn Radius without Brakes
14 ft (4.36 m) (6110M & 6120M)
Not Published
Height to Top of ROPS
105.2-115.0 in depending on rear tire SRI (ground to extended ROPS, without beacon light, open operator's station)
Not Published
Height to Top of ROPS (folded)
Not Published
Not Published
Height to Top of Cab Model
105.4-115.3 in depending on rear tire SRI (ground to cab roof, without beacon light)
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
