▶ EngineEngine Manufacturer Daedong Shibaura Engine Model CK30: 3A150LWM; CK30 HST: 3A150LWH N843 Engine Type 3 cylinder, in-line vertical, water-cooled 4-cycle diesel 3-cylinder naturally aspirated diesel No. of Cylinders 3 3 Displacement 91.5 in³ 91.3 in³ Rated Engine Speed 2600 rpm 2600 rpm Engine Power (Gross) 30 hp 30 hp PTO Power CK30: 23 hp; CK30 HST: 22 hp Gear: 25.5 hp; Hydrostatic: 24 hp Engine Emissions Constraints Tier 2 Not Published Cooling System Type Water-cooled Liquid-cooled Air Cleaner Not Published Not Published Fuel System Not Published Not Published Alternator 50 A, 12 V Not Published ▶ HydraulicsPump Type Gear (tandem) Gear Implement Flow Not Published 6.2 gpm Steering Flow Not Published 3.8 gpm Total Hydraulic Flow 12.7 gpm 10.0 gpm (6.2 + 3.8, computed) Overall Hydraulic Pump Flow 12.7 gpm 10.0 gpm (6.2 + 3.8, computed) Hydraulic System Type Open center Open center Rear Remote Hydraulic Flow Not Published Not Published No. of Standard Remote Valves 0 Not Published No. of Optional Remote Valves 2 Not Published ▶ Fluid CapacityFuel Tank Capacity 7.9 gal 7.1 gal Coolant Capacity Not Published Not Published Crankcase Capacity 6.1 qt Not Published Transmission / Hydraulic System Capacity CK30: 7.1 gal; CK30 HST: 7.9 gal Not Published Front Axle Fluid Capacity Not Published Not Published ▶ PTO & HitchPTO Type Live Live (FWD); transmission-driven (2WD gear) PTO Rear 540 rpm (1,000 rpm optional) Gear 2WD: transmission-driven 540 rpm; Gear FWD: live 540 rpm; Hydrostatic FWD: live 540 rpm Mid-PTO Availability Optional, 2,000 rpm Optional on gear transmission: 2WD gear transmission-driven with overrunning clutch, 2000 rpm; FWD gear and hydrostatic: live 2000 rpm Category, 3-Point Hitch Category I Category I Hitch Lift Capacity Not Published Not Published Hitch Lift Capacity (at 24”) 1,764 lb 1,635 lb Lift Control Type Position control Not Published ▶ Transmission & DrivetrainTransmission Type CK30: Synchro shuttle; CK30 HST: Hydrostatic Gear: 9x3; Hydrostatic: 3-range (FWD only) No. of Speeds CK30: 8F/8R; CK30 HST: Infinite, 3 range Gear: 9F/3R; Hydrostatic: 3 ranges Max Travel Speed (Forward) CK30: 14.91 mph; CK30 HST: 13.07 mph Gear: 12.9 mph (R1 tires), 12.1 mph (R4 tires); Hydrostatic: 14.5 mph (R1 tires), 13.6 mph (R4 tires) Max Travel Speed (Reverse) CK30: 13.14 mph; CK30 HST: 9.15 mph Not Published Clutch CK30: Dry dual; CK30 HST: Dry single Not Published Differential Lock & Limited Slip Options Mechanical rear differential lock (standard) Mechanical rear differential lock (heel pedal) ▶ Chassis, Steering & ControlsFrame Type Not Published Not Published Steering Hydrostatic power steering Power steering Brakes Wet disc Wet disc Seat Suspension & Adjustability Not Published Padded contoured seat on an inclined track Front Axle Type 4WD, bevel gear type FWD (standard); 2WD (optional) Front Axle Rating Not Published Not Published Drawbar Capacity Not Published Not Published ▶ Dimensions & ManeuverabilityOverall Length with 3-Point Hitch 122.2 in 2WD, ag tires: 108.9 in; FWD, R4 tires: 111.4 in (both with 3-point hitch raised) Overall Width 54.6 in 54.3 in (minimum, ag tires); 62 in (R4 tires) Wheelbase 66.1 in 63.0 in Ground Clearance 13.82 in Not Published Min. Turn Radius without Brakes 9.5 ft (with brake applied) Not Published Height to Top of ROPS 96.8 in 82.3 in (R4 tires) Height to Top of ROPS (folded) Not Published Not Published Height to Top of Cab Model Not Published Not Published ▶ WeightTractor Weight (Base) CK30: 3,184 lb; CK30 HST: 3,142 lb 2,193 lb (2WD, ag tires, 9x3 gear); 2,385 lb (FWD, R4 tires, 9x3 gear) Weight with ROPS and Loader Not Published Not Published Weight with Cab and Loader Not Published Not Published ▶ Tire OptionsTire Size & Options Front AG 7-14 (Turf 27x8.50-15, Industrial 25x8.50-14); Rear AG 11.2-24 (Turf 41x14.00-20, Industrial 15-19.5) R1 Ag 7.4x14 / 11.2x24; R3 Turf 24x8.50-14 / 13.6x16; R4 Industrial 25x8.50-14 / 15x19.5 R1 Agricultural - Front 7-14 Not Published R1 Agricultural - Rear 11.2-24 11.2x24 R3 Turf - Front 27x8.50-15 24x8.50-14 R3 Turf - Rear 41x14.00-20 13.6x16 R4 Industrial - Front 25x8.50-14 25x8.50-14 R4 Industrial - Rear 15-19.5 15x19.5 ▶ Loader & AttachmentsQuick Attach Loader System Not Published Not Published Loader Model KL130 7308 Loader Lift Height KL130: 92.5 in 7308: 100.5 in Loader Lift Capacity (Full Height) KL130: 1,155 lb (at pivot pins, full height) 7308: 875 lb Loader Breakout Force KL130: 2,046 lb (at pivot pins) 7308: 1,602 lb ▶ WarrantyWarranty Length & Coverage Not Published Not Published ▶ ITC Company AccessoriesAccessories that fit None tagged yet 
