▶ EngineEngine Manufacturer KIOTI (Daedong) Shibaura Engine Model 3HT-S4TM58A N4LDI-TA Engine Type KIOTI 3 Cylinder, In-Line Vertical, Water-Cooled 4-Cycle Turbo Diesel, CRDI 4-cylinder, turbocharged, liquid-cooled diesel No. of Cylinders 3 4 Displacement 111.4 in³ 135.2 in³ Rated Engine Speed 2600 rpm 2600 rpm Engine Power (Gross) 57.7 hp 57.3 hp PTO Power 48.3 hp Gear: 48.7 hp; HST: 45.9 hp Engine Emissions Constraints Tier 4 Tier 4 Cooling System Type Water-cooled Liquid-cooled Air Cleaner Dry type element Primary and secondary elements Fuel System Common Rail Direct Injection (CRDI) Electronically controlled high-pressure common rail Alternator Not Published 90 A ▶ HydraulicsPump Type Gear Gear-type single pump Implement Flow 9.61 gpm Not Published Steering Flow 6.87 gpm Not Published Total Hydraulic Flow 16.5 gpm 12.4 gpm Overall Hydraulic Pump Flow 16.5 gpm 12.4 gpm Hydraulic System Type Open Center Open center Rear Remote Hydraulic Flow Not Published Not Published No. of Standard Remote Valves 1 0 No. of Optional Remote Valves 1 1 factory-installed; up to 3 field-installed ▶ Fluid CapacityFuel Tank Capacity 13.2 gal 14 gal Coolant Capacity 2.03 gal 1.66 gal Crankcase Capacity 1.95 gal 1.53 gal Transmission / Hydraulic System Capacity 11.36 gal 10.04 gal Front Axle Fluid Capacity 2.25 gal 2.21 gal ▶ PTO & HitchPTO Type Independent Independent, electro-hydraulically engaged PTO Rear 540 rpm 540 rpm (1-3/8 in 6-spline) Mid-PTO Availability Optional (2,000 rpm) No mid-PTO Category, 3-Point Hitch Category II Category I and II Hitch Lift Capacity 2,940 lb Not Published Hitch Lift Capacity (at 24”) 2,493 lb 2,425 lb Lift Control Type Position with Draft Control Not Published ▶ Transmission & DrivetrainTransmission Type Synchro Shuttle Gear: 8 x 8 (4-speed x 2 sub-range) Syncro-Shuttle; HST: 3-range mechanical HST No. of Speeds 12x12 Gear: 8 forward and 8 reverse; HST: infinite forward and reverse (3-range) Max Travel Speed (Forward) 16.7 mph Not Published Max Travel Speed (Reverse) 14.8 mph Not Published Clutch Dry Type Single Stage Dry single-disc Differential Lock & Limited Slip Options Mechanical differential lock: rear standard Mechanical engagement (Gear: right side heel pedal; HST: left side heel pedal) ▶ Chassis, Steering & ControlsFrame Type Not Published Not Published Steering Hydrostatic Power Steering Power steering Brakes Wet disc type Internal wet disc, 2 pedals (Gear: right hand; HST: left hand) Seat Suspension & Adjustability Deluxe suspension seat Suspended vinyl seat with retractable seatbelt Front Axle Type Not Published Cast steel 4WD front axle with center drive line and bevel-gear final drives Front Axle Rating Not Published Not Published Drawbar Capacity Not Published Not Published ▶ Dimensions & ManeuverabilityOverall Length with 3-Point Hitch 136.4 in 133 in Overall Width 67.1 in 74 in Wheelbase 75.5 in 78 in Ground Clearance 13.4 in Not Published Min. Turn Radius without Brakes 11.0 ft (with brake applied) Not Published Height to Top of ROPS 98.4 in 104 in Height to Top of ROPS (folded) Not Published 80 in Height to Top of Cab Model Not Published Not Published ▶ WeightTractor Weight (Base) 4,027 lb Gear: 3,847 lb; HST: 3,891 lb Weight with ROPS and Loader Not Published Not Published Weight with Cab and Loader Not Published Not Published ▶ Tire OptionsTire Size & Options R1 Agricultural, R3 Turf, R4 Industrial R1 ag: 9.5x16 front, 13.6x28 or 16.9x24 rear; R3 turf: 27x10.50-15 front, 44x18.00-20 rear; R4 industrial: 10-16.5 front, 17.5L-24 rear R1 Agricultural - Front 8-16 9.5x16 R1 Agricultural - Rear 13.6-24 13.6x28; 16.9x24 R3 Turf - Front 29-12.5-15 27x10.50-15 R3 Turf - Rear 21.5L-16.1 44x18.00-20 R4 Industrial - Front 10-16.5 10-16.5 R4 Industrial - Rear 14.9-24 17.5L-24 ▶ Loader & AttachmentsQuick Attach Loader System Built-in parking stand; quick attach/detach; single-lever joystick control with float; bucket level indicator L135E: optional skid steer tool carrier Loader Model KL5810 L135E Loader Lift Height KL5810: 106.3 in (to pivot pin) L135E: 110.2 in Loader Lift Capacity (Full Height) KL5810: 2,621 lb (at pivot pin, max height) L135E: 2,430 lb Loader Breakout Force KL5810: 3,896 lb (at pivot pin) L135E: 2,870 lb ▶ WarrantyWarranty Length & Coverage Non-commercial tractor: 24 months, unlimited hours, parts & labor; non-commercial powertrain (engine and driveline): 72 months, unlimited hours, parts & labor 5-year powertrain warranty ▶ ITC Company AccessoriesAccessories that fit None tagged yet 
