▶ EngineEngine Manufacturer Kubota Shibaura Engine Model V2403-CR-TIE5 N4LDI-TA Engine Type Turbocharged and intercooled, common-rail, water-cooled 4-cycle diesel 4-cylinder turbocharged intercooled diesel, liquid-cooled No. of Cylinders 4 4 Displacement 148.5 in³ 135.2 in³ Rated Engine Speed 2300 rpm 2600 rpm Engine Power (Gross) 60 hp 59.9 hp PTO Power 53 hp Mech: 46.1 hp; HST: 44.4 hp Engine Emissions Constraints Not Published Tier 4 Cooling System Type Water-cooled Liquid-cooled Air Cleaner Not Published Dry Fuel System Common rail system (CRS), electronically controlled fuel injection Common rail direct injection Alternator Not Published Not Published ▶ HydraulicsPump Type Not Published Engine-driven gear-type pump Implement Flow 9.83 gpm Not Published Steering Flow Not Published Not Published Total Hydraulic Flow Not Published Not Published Overall Hydraulic Pump Flow Not Published 12x12 Power Shuttle: 12.7 gpm; HST: 12.6 gpm Hydraulic System Type Not Published Open center Rear Remote Hydraulic Flow Not Published 12.1 gpm No. of Standard Remote Valves Not Published Not Published No. of Optional Remote Valves Up to 3 (optional) Up to 3 ▶ Fluid CapacityFuel Tank Capacity Not Published 14 gal Coolant Capacity Not Published 7.08 qt Crankcase Capacity Not Published 6.87 qt Transmission / Hydraulic System Capacity Not Published Power Shuttle: 11.35 gal; HST: 9.25 gal Front Axle Fluid Capacity Not Published 9 qt ▶ PTO & HitchPTO Type Independent Independent, with soft-start feature PTO Rear 540 rpm 540 rpm (6-spline) Mid-PTO Availability Not Published Optional, 2,000 rpm (not offered with the 12x12 power shuttle) Category, 3-Point Hitch Category I and II Category I with extendable ball ends Hitch Lift Capacity 3,858 lb Not Published Hitch Lift Capacity (at 24”) 2,976 lb 12x12 Power Shuttle: 3,307 lb; HST: 3,086 lb Lift Control Type Not Published Draft control optional ▶ Transmission & DrivetrainTransmission Type Hydrostatic transmission, 3-range, with Hydro-Dual Speed (H-DS) 12 x 12 power shuttle or 3-range hydrostatic No. of Speeds 3-range 12 x 12 Power Shuttle (3 ranges, 4 gears); HST: 3-range, infinite speeds in each range Max Travel Speed (Forward) 18.5 mph Not Published Max Travel Speed (Reverse) Not Published Not Published Clutch Not Published Multiple stage wet type Differential Lock & Limited Slip Options Not Published Mechanical engagement via right side heel pedal ▶ Chassis, Steering & ControlsFrame Type Open ROPS or enclosed cab Not Published Steering Hydrostatic power steering Power steering Brakes Wet disc type Internal wet disc brakes, independent foot pedals Seat Suspension & Adjustability Not Published Suspended seat with armrests and seat belts (vinyl on ROPS, cloth on cab), tilt steering Front Axle Type Not Published Cast-steel 4WD front axle, center driveline, bevel-gear final drives Front Axle Rating Not Published Not Published Drawbar Capacity Not Published Not Published ▶ Dimensions & ManeuverabilityOverall Width 67.3 in 12x12 Power Shuttle: 71.1 in; HST: 65.4 in Wheelbase 81.3 in 12x12 Power Shuttle: 80.3 in; HST: 77.9 in Ground Clearance 15.4 in 14.8 in Min. Turn Radius without Brakes 9.5 ft (with brake applied) Not Published Height to Top of ROPS 98.0 in 12x12 Power Shuttle: 103.2 in; HST: 102.4 in Height to Top of ROPS (folded) Not Published Not Published Height to Top of Cab Model 93.3 in 12x12 Power Shuttle: 93.3 in; HST: 92.9 in Overall Length 133.9 in (without 3-point hitch) HST: 132.3 in ▶ WeightTractor Weight (Base) 4,387 lb (ROPS); 4,762 lb (cab) 12x12 Power Shuttle: 4,233 lb (ROPS base weight) Weight with ROPS and Loader Not Published Not Published Weight with Cab and Loader Not Published Not Published ▶ Tire OptionsTire Size & Options Standard: 9.5-16 front, 14.9-26 rear AG, Turf, Industrial, Snow R1 Agricultural - Front 9.5-16 9.5x16 R1 Agricultural - Rear 14.9-26 16.9x26 R3 Turf - Front Not Published 27x10.50-15 R3 Turf - Rear Not Published 44x18.00-20 R4 Industrial - Front Not Published 12-16.5 R4 Industrial - Rear Not Published 18.4-24 ▶ Loader & AttachmentsQuick Attach Loader System LA1056, LM1056: toolless loader removal with integrated parking stands; optional third-function valve DL135: Skid steer quick attach Loader Model LA1056; LM1056 DL135 Loader Lift Height LA1056: 117 in; LM1056: 117 in DL135: 111 in (at pivot pin) Loader Lift Capacity (Full Height) LA1056: 2,427 lb; LM1056: 2,471 lb DL135: 2,610 lb (at pivot pin, full height) Loader Breakout Force LA1056: 4,069 lbf; LM1056: 4,061 lbf DL135: 4,000 lb (at pivot pin) ▶ WarrantyWarranty Length & Coverage Not Published Five-year powertrain warranty 