LS Tractor MT122 vs LS Tractor MT125 | Side-by-side comparison | ITC Resource Center
ITC Resource Center
Tractor Comparison
Pick up to 4tractors and we'll lay every spec sheet out side by side. Same data we publish on the individual model pages, stacked in columns so you can compare numbers at a glance.
—
LSMT122
—
LSMT125
Comparison loaded for 2 tractors.
Spec
LS TractorMT122
LS TractorMT125
PTO Power
15 hp
17.2 hp
Alternator
40 A, 12 V
40 A, 12 V
Air Cleaner
Replaceable paper elements
Dry
Engine Type
3-cylinder, Indirect-injection, Water-cooled
3-cylinder, Indirect-injection, Water-cooled
Fuel System
Mechanical, in-line type
Indirect Injection
Displacement
68 in³
77.3 in³
No. of Cylinders
3
3
Rated Engine Speed
3000 rpm
3000 rpm
Cooling System Type
Water-cooled
Water-cooled
Engine Manufacturer
Yanmar
Yanmar
Engine Power (Gross)
21.5 hp
24.7 hp
Engine Emissions Constraints
Tier 4
Tier 4
Tractor Weight (Base)
1,433 lbs
1,444 lbs
Tractor Weight with Loader
1,433 lbs.
1,444 lbs.
Weight with Cab and Loader
Not Applicable
Not Published
Weight with ROPS and Loader
Not Published
1444 lb
Pump Type
Gear
Gear pump type, Transmission drive
Steering Flow
2.1 gpm
2.1 gpm
Implement Flow
4.6 gpm
4.6 gpm
Pump Flow (Total)
6.7 gpm
6.7 gpm
Pump Flow (Steering)
2.1 gpm
2.1 gpm
Total Hydraulic Flow
6.7 gpm
6.7 gpm
Hydraulic System Type
Open center system, Position control
Open center system, Position control
Pump Flow (Implement)
4.6 gpm
4.6 gpm
System Operating Pressure
1,885.5 psi
12.7~13.2 MPa (1849~1920 psi)
Rear Remote Hydraulic Flow
Not Published
NOT FOUND — No source explicitly lists a dedicated 'Rear Remote Hydraulic Flow' spec. The closest published figure is the implement pump flow of 4.6 gpm, but no source labels this specifically as 'Rear Remote' flow.
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
