LS Tractor MT125 vs John Deere 1025R | Side-by-side comparison | ITC Resource Center
Compare Tractors
See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
Every published spec, side by side, including the details the graphs above don't chart.
Spec
LS TractorMT125
John Deere1025R
PTO Power
17.2 hp
18.2 hp
Alternator
40 A, 12 V
40 A
Air Cleaner
Dry
Dual element with mechanical restriction indicator
Engine Type
3-cylinder, Indirect-injection, Water-cooled
Diesel
Fuel System
Indirect Injection
Indirect injection
Displacement
77.3 in³
77.3 in³
No. of Cylinders
3
3
Rated Engine Speed
3000 rpm
3200 rpm
Cooling System Type
Water-cooled
Water pump
Engine Manufacturer
Yanmar
Yanmar
Engine Power (Gross)
24.7 hp
23.9 hp @ 200 rpm
Engine Emissions Constraints
Tier 4
Tier 4
Tractor Weight (Base)
1,444 lbs
Open station: 1556 lb
Weight with ROPS and Loader
1444 lb
approx. 1,444 lb shipping weight open station (no loader); operating weight with loader approx. 1,556 lb shipping
Weight with Cab and Loader
Not Published
approx. 1,996 lb shipping weight with cab
Warranty Length & Coverage
6-Year Limited Warranty
6-year / 2,000-hour powertrain warranty (standard); PowerGard extended warranty available
Pump Type
Gear pump type, Transmission drive
Single gear
Steering Flow
2.1 gpm
3.5 gpm
Implement Flow
4.6 gpm
3.5 gpm
Total Hydraulic Flow
6.7 gpm
6.3 gpm 23.8 lpm
Hydraulic System Type
Open center system, Position control
Open center
System Operating Pressure
12.7~13.2 MPa (1849~1920 psi)
2000 psi
Rear Remote Hydraulic Flow
NOT FOUND — No source explicitly lists a dedicated 'Rear Remote Hydraulic Flow' spec. The closest published figure is the implement pump flow of 4.6 gpm, but no source labels this specifically as 'Rear Remote' flow.
3.5 gpm per pump (implement circuit); total system output 6.3 gpm
Overall Hydraulic Pump Flow
6.7 gpm
3.5 gpm 13.2 lpm
No. of Optional Remote Valves
1 Set
Three
No. of Standard Remote Valves
0 (optional)
n/a
PTO Rear
540 rpm
540 rpm
PTO Type
Independent
Independent
Lift Control Type
Position Control
position control
Hitch Lift Capacity
970 lbs. (At 24 in: 728)
758 lb
Mid-PTO Availability
Standard (2,500 rpm)
2100 rpm
Category, 3-Point Hitch
Category 1
Limited Category 1
Hitch Lift Capacity (at 24”)
728 lb
758 lb
R3 Turf - Rear
26x12.0-12 4PR HSR82 (Turf)
26x12-12
R3 Turf - Front
18x8.50-10 4PR HS482 (Turf)
18x8.50-10
Tire Size & Options
Industrial Front/Rear 18×18.5 - 10/26 x 12.0 - 12; Versa Turf Front/Rear: 18×18.5 - 10/26 x 12.0 - 12
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
