▶ EngineEngine Manufacturer Mahindra Daedong Engine Model Not Published 3HT-TM4B Engine Type Naturally aspirated direct-injection diesel Turbocharged diesel No. of Cylinders 4 3 Displacement 166.7 in³ 111.4 in³ Rated Engine Speed 2600 rpm 2750 rpm Engine Power (Gross) 44 hp 44.9 hp PTO Power 39 hp 32.8 hp Engine Emissions Constraints Tier 4 Tier 4 Cooling System Type Not Published Liquid-cooled Air Cleaner Not Published Not Published Fuel System Direct injection Not Published Alternator OOS: 45 A, 12 V; Cab: 90 A, 12 V Not Published ▶ HydraulicsPump Type Not Published Not Published Implement Flow 8.2 gpm 9.6 gpm Steering Flow OOS: 4.1 gpm; Cab: 4.5 gpm 6.9 gpm Total Hydraulic Flow Not Published 16.5 gpm Overall Hydraulic Pump Flow Not Published 16.5 gpm Hydraulic System Type Open Center with position control Open center Rear Remote Hydraulic Flow Not Published Not Published No. of Standard Remote Valves Not Published 1 pair No. of Optional Remote Valves 1 spool optional 1 pair (2nd pair optional) ▶ Fluid CapacityFuel Tank Capacity 9.0 gal 11.9 gal Coolant Capacity Not Published Not Published Crankcase Capacity Not Published Not Published Transmission / Hydraulic System Capacity Not Published Not Published Front Axle Fluid Capacity Not Published Not Published ▶ PTO & HitchPTO Type Independent Independent PTO Rear 540 rpm @ 2650 rpm 540 rpm Mid-PTO Availability Not Published Optional: 2119 rpm Category, 3-Point Hitch CAT I with check chains Category I Hitch Lift Capacity 2,646 lb Not Published Hitch Lift Capacity (at 24”) Not Published 2,716 lb Lift Control Type Not Published Hydraulic Position Control System ▶ Transmission & DrivetrainTransmission Type Synchro shuttle with partial synchromesh 3-Range HST No. of Speeds 12F/12R Infinite forward and reverse (3-range) Max Travel Speed (Forward) Not Published 16.3 mph Max Travel Speed (Reverse) Not Published 15.9 mph Clutch Single plate, dry Not Published Differential Lock & Limited Slip Options Not Published Rear differential lock (standard) ▶ Chassis, Steering & ControlsFrame Type Not Published Not Published Steering Hydrostatic power steering, tilt Hydrostatic power steering Brakes Wet disc Wet multi-disc Seat Suspension & Adjustability Not Published Adjustable seat (standard) Front Axle Type Not Published Four-wheel drive (standard) Front Axle Rating Not Published Not Published Drawbar Capacity Not Published Not Published ▶ Dimensions & ManeuverabilityOverall Width 63.2 in 70.3 in (with industrial tires) Wheelbase Not Published 71.2 in Ground Clearance Not Published 15.3 in (with industrial tires) Min. Turn Radius without Brakes 7.87 ft 116.1 in (with brake applied) Height to Top of ROPS 94.4 in Not Applicable Height to Top of ROPS (folded) Not Published Not Applicable Height to Top of Cab Model 94.4 in 94.3 in Overall Length 119.3 in 125.5 in (with 3-point hitch) ▶ WeightTractor Weight (Base) 3,285 lb (2545 Shuttle, operating weight); 3,506 lb (2545 Shuttle Cab, operating weight) 4,300 lb Weight with ROPS and Loader Not Published Not Published Weight with Cab and Loader Not Published Not Published ▶ Tire OptionsTire Size & Options Not Published Not Published R1 Agricultural - Front 8.3x16 8-16 R1 Agricultural - Rear 12.4x24 13.6-24 R3 Turf - Front Not Published Not Published R3 Turf - Rear Not Published Not Published R4 Industrial - Front Not Published Not Published R4 Industrial - Rear Not Published Not Published ▶ Loader & AttachmentsQuick Attach Loader System Not Published Front-end loader with quick-tach mounting system Loader Model 2545L (open station); 2545CL (cab) FL9-2 Loader Lift Height 2545L: 101.9 in; 2545CL: 101.9 in 103.0 in (to pivot pin) Loader Lift Capacity (Full Height) 2545L: 2,041 lb; 2545CL: 2,041 lb 1,858 lb (at pivot pin, max height) Loader Breakout Force 2545L: 3,430 lb; 2545CL: 3,430 lb 3,938 lb (at pivot point) ▶ WarrantyWarranty Length & Coverage Not Published Basic 24 months or 1,500 hours; powertrain 48 months for consumer use, or 36 months or 2,000 hours for business use ▶ ITC Company AccessoriesAccessories that fit None tagged yet 
