Mahindra 3540 vs New Holland Workmaster 40 | Side-by-side comparison | ITC Resource Center
Compare Tractors
See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
Every published spec, side by side, including the details the graphs above don't chart.
Spec
Mahindra3540
New HollandWorkmaster 40
Engine Manufacturer
Mahindra
LS Mtron
Engine Model
Not Published
L3C19-T4
Engine Type
Naturally aspirated direct injection diesel
3-cylinder, turbocharged, liquid-cooled diesel
No. of Cylinders
4
3
Displacement
166.64 in³
114.7 in³
Rated Engine Speed
2800 rpm
2600 rpm
Engine Power (Gross)
40 hp
40 hp
PTO Power
31 hp
Gear: 34 hp; HST: 32 hp
Engine Emissions Constraints
Tier 4
Tier 4
Cooling System Type
Water-cooled
Pressurized liquid with recirculating bypass
Air Cleaner
Not Published
Dual element dry air cleaner (primary and inner safety element)
Fuel System
Direct injection
High pressure common rail, ECU-controlled timing
Alternator
45 A, 12 V
70 A, 12 V
Pump Type
Not Published
Gear
Implement Flow
11 gpm
8.2 gpm
Steering Flow
5 gpm
Gear: 4.2 gpm; HST: 5.3 gpm
Total Hydraulic Flow
16 gpm (11 + 5, computed)
Gear: 12.4 gpm; HST: 13.5 gpm
Overall Hydraulic Pump Flow
Not Published
Gear: 12.4 gpm; HST: 13.5 gpm
Hydraulic System Type
Open center
Open center
Rear Remote Hydraulic Flow
Not Published
Not Published
No. of Standard Remote Valves
1
0
No. of Optional Remote Valves
Not Published
1 or 2
Fuel Tank Capacity
11.3 gal (3540 PST); 11.3 gal (3540 HST); 14.5 gal (3540 PST Cab); 14.5 gal (3540 HST Cab)
7.4 gal
Coolant Capacity
Not Published
7.5 qt
Crankcase Capacity
Not Published
5.8 qt
Transmission / Hydraulic System Capacity
Not Published
8.5 gal
Front Axle Fluid Capacity
Not Published
6.9 qt
PTO Type
Independent
Independent, electro-hydraulic engagement
PTO Rear
540 rpm @ 2404 rpm
540 rpm
Mid-PTO Availability
Not Published
HST: Standard; Gear: Optional (2,000 rpm)
Category, 3-Point Hitch
CAT I with telescopic lower links
Category I
Hitch Lift Capacity
3090 lb
1,808 lb
Hitch Lift Capacity (at 24”)
Not Published
1,433 lb
Lift Control Type
Position and draft control
Position control
Transmission Type
Power shuttle with full synchro mesh (3540 PST); HST, 3 ranges (3540 HST); Power shuttle with full synchro mesh (3540 PST Cab); HST, 3 ranges (3540 HST Cab)
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
