Mahindra 3616 vs Mahindra 1635 HST Cab | Side-by-side comparison | ITC Resource Center
Compare Tractors
See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
Front Mounted, Engine Driven, Pressure Loading Gear Type
Not Published
Implement Flow
7.7 gpm at 2600 rpm
7.5 gpm
Steering Flow
3.4 gpm at 2600 rpm
3.3 gpm
Total Hydraulic Flow
Not Published
10.8 gpm
Overall Hydraulic Pump Flow
Not Published
10.8 gpm
Hydraulic System Type
Open center
Open Center
Rear Remote Hydraulic Flow
Not Published
Not Published
No. of Standard Remote Valves
Not Published
Not Published
No. of Optional Remote Valves
1 (optional)
Optional, single valve
Fuel Tank Capacity
7.1 gal
7.7 gal
Coolant Capacity
Not Published
Not Published
Crankcase Capacity
Not Published
Not Published
Transmission / Hydraulic System Capacity
Not Published
Not Published
Front Axle Fluid Capacity
Not Published
Not Published
PTO Type
Gear Drive: independent; Hydrostatic Drive: live, with internal overrunning clutch
Live with o/r clutch
PTO Rear
540 rpm @ 2376 rpm
540 rpm @ 2376 rpm
Mid-PTO Availability
Optional, 2000 rpm @ 2525 rpm
Optional; 2000 rpm @ 2526 rpm
Category, 3-Point Hitch
Category I
CAT I with Telescoping Stabilizers & Flex Links
Hitch Lift Capacity
2,646 lb
Not Published
Hitch Lift Capacity (at 24”)
1,720 lb
1,720 lb
Lift Control Type
Position control
Position control
Transmission Type
Gear Drive: synchromesh shuttle and constant-mesh main gear shift, two ranges of selective sliding gears; Hydrostatic Drive: HST, three ranges of selective sliding gears
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
