Mahindra 3616 vs Massey Ferguson 1734E | Side-by-side comparison | ITC Resource Center
Compare Tractors
See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
Front Mounted, Engine Driven, Pressure Loading Gear Type
Gear-type pump
Implement Flow
7.7 gpm at 2600 rpm
Not Published
Steering Flow
3.4 gpm at 2600 rpm
3.8 gpm
Total Hydraulic Flow
Not Published
10.5 gpm
Overall Hydraulic Pump Flow
Not Published
Not Published
Hydraulic System Type
Open center
Open center
Rear Remote Hydraulic Flow
Not Published
6.7 gpm
No. of Standard Remote Valves
Not Published
Not Published
No. of Optional Remote Valves
1 (optional)
Up to 2
Fuel Tank Capacity
7.1 gal
10.04 gal
Coolant Capacity
Not Published
1.32 gal
Crankcase Capacity
Not Published
1.22 gal
Transmission / Hydraulic System Capacity
Not Published
10.04 gal
Front Axle Fluid Capacity
Not Published
1.48 gal
PTO Type
Gear Drive: independent; Hydrostatic Drive: live, with internal overrunning clutch
Not Published
PTO Rear
540 rpm @ 2376 rpm
540 rpm (1-3/8 in 6-spline)
Mid-PTO Availability
Optional, 2000 rpm @ 2525 rpm
Not Published
Category, 3-Point Hitch
Category I
Category I
Hitch Lift Capacity
2,646 lb
2,205 lb
Hitch Lift Capacity (at 24”)
1,720 lb
1,600 lb
Lift Control Type
Position control
Not Published
Transmission Type
Gear Drive: synchromesh shuttle and constant-mesh main gear shift, two ranges of selective sliding gears; Hydrostatic Drive: HST, three ranges of selective sliding gears
9 x 3 mechanical shift constant mesh gears or 3-range hydrostatic
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
