Mahindra 3616 vs Massey Ferguson MF 1E.35 | Side-by-side comparison | ITC Resource Center
Compare Tractors
See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
Front Mounted, Engine Driven, Pressure Loading Gear Type
Two gear-type pumps
Implement Flow
7.7 gpm at 2600 rpm
7.6 gpm
Steering Flow
3.4 gpm at 2600 rpm
3.8 gpm
Total Hydraulic Flow
Not Published
11.4 gpm (7.6 + 3.8, computed)
Overall Hydraulic Pump Flow
Not Published
11.4 gpm (7.6 + 3.8, computed)
Hydraulic System Type
Open center
Open center
Rear Remote Hydraulic Flow
Not Published
Not Published
No. of Standard Remote Valves
Not Published
Not Published
No. of Optional Remote Valves
1 (optional)
Not Published
Fuel Tank Capacity
7.1 gal
10 gal
Coolant Capacity
Not Published
Not Published
Crankcase Capacity
Not Published
Not Published
Transmission / Hydraulic System Capacity
Not Published
Not Published
Front Axle Fluid Capacity
Not Published
Not Published
PTO Type
Gear Drive: independent; Hydrostatic Drive: live, with internal overrunning clutch
Mech: Independent; HST: Transmission
PTO Rear
540 rpm @ 2376 rpm
540 rpm
Mid-PTO Availability
Optional, 2000 rpm @ 2525 rpm
Not Published
Category, 3-Point Hitch
Category I
Category I
Hitch Lift Capacity
2,646 lb
2,205 lb
Hitch Lift Capacity (at 24”)
1,720 lb
1,598 lb
Lift Control Type
Position control
Not Published
Transmission Type
Gear Drive: synchromesh shuttle and constant-mesh main gear shift, two ranges of selective sliding gears; Hydrostatic Drive: HST, three ranges of selective sliding gears
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
