▶ EngineEngine Manufacturer Mitsubishi Shibaura Engine Model S3L2 Not Published Engine Type Four-stroke, naturally aspirated, indirect injection, water-cooled diesel 3-cylinder diesel, liquid-cooled No. of Cylinders 3 3 Displacement 80.4 in³ 91.5 in³ Rated Engine Speed 2500 rpm 2600 rpm Engine Power (Gross) 24 hp 24 hp PTO Power 20 hp 19.2 hp Engine Emissions Constraints Not Published Tier 4 Cooling System Type Water Cooled Liquid-cooled Air Cleaner Not Published Not Published Fuel System Indirect Injection Indirect low-pressure injection Alternator 50 A, 12 V Not Published ▶ HydraulicsPump Type Not Published Gear-type pump Implement Flow 4.6 gpm Not Published Steering Flow Not Published 3.8 gpm Total Hydraulic Flow 7.3 gpm 10.5 gpm Overall Hydraulic Pump Flow 7.3 gpm Not Published Hydraulic System Type Open Center Open center Rear Remote Hydraulic Flow Not Published 6.7 gpm No. of Standard Remote Valves Not Published Not Published No. of Optional Remote Valves Not Published Up to 2 ▶ Fluid CapacityFuel Tank Capacity 6.1 gal 10.04 gal Coolant Capacity Not Published 1.32 gal Crankcase Capacity Not Published 1.22 gal Transmission / Hydraulic System Capacity Not Published 10.04 gal Front Axle Fluid Capacity Not Published 1.48 gal ▶ PTO & HitchPTO Type Live Transmission driven PTO Rear 540 @ 2376 rpm 540 rpm (1-3/8 in 6-spline) Mid-PTO Availability Standard; 2000 @ 2556 rpm Not Published Category, 3-Point Hitch CAT I Category I Hitch Lift Capacity 1,354 lb 2,205 lb Hitch Lift Capacity (at 24”) Not Published 1,600 lb Lift Control Type Not Published Not Published ▶ Transmission & DrivetrainTransmission Type HST - 2 ranges 9 x 3 mechanical shift constant mesh gears or 3-range hydrostatic No. of Speeds Infinite Gear: 9F / 3R; HST: 3-range infinite Max Travel Speed (Forward) Not Published Not Published Max Travel Speed (Reverse) Not Published Not Published Clutch Dry - Single Gear: dry single disc Differential Lock & Limited Slip Options Not Published Mechanical engagement via heel pedal ▶ Chassis, Steering & ControlsFrame Type Not Published Not Published Steering Not Published Power steering Brakes Wet disc Internal wet brakes, single brake pedal on HST, two brake pedals on gear models Seat Suspension & Adjustability Not Published Suspended vinyl seat with retractable seatbelt, fixed steering wheel Front Axle Type Not Published Cast-steel 4WD front axle, center driveline, bevel-gear final drives Front Axle Rating Not Published Not Published Drawbar Capacity Not Published Not Published ▶ Dimensions & ManeuverabilityOverall Width 50.7 in 52.4 in Wheelbase 58.2 in 65.9 in Ground Clearance 7.2 in Not Published Min. Turn Radius without Brakes 7.2 ft Not Published Height to Top of ROPS 81.5 in 97.6 in Height to Top of ROPS (folded) Not Published 63.8 in Height to Top of Cab Model Not Published Not Published Overall Length 106.1 in 116 in (without 3-point hitch) ▶ WeightTractor Weight (Base) 1,715 lb HST: 2,657 lb Weight with ROPS and Loader Not Published Not Published Weight with Cab and Loader Not Published Not Published ▶ Tire OptionsTire Size & Options Not Published Not Published R1 Agricultural - Front 6x12 Not Published R1 Agricultural - Rear 9.5x16 Not Published R3 Turf - Front 20x8-10 Not Published R3 Turf - Rear 29x12.5-15 Not Published R4 Industrial - Front 20x8-10 Not Published R4 Industrial - Rear 27x12.5-15 Not Published ▶ Loader & AttachmentsQuick Attach Loader System Not Published L105E: skid steer or pin-type implement attachments Loader Model MXL25L L105E Loader Lift Height 75 in L105E: 95.7 in (at pivot pin) Loader Lift Capacity (Full Height) 900 lb (at pivot pin) L105E: 1,210 lb (at pivot pin, full height) Loader Breakout Force 2,000 lb L105E: 1,460 lb (at pivot pin) ▶ WarrantyWarranty Length & Coverage Not Published 5-year powertrain warranty ▶ ITC Company AccessoriesAccessories that fit None tagged yet 
