▶ EngineEngine Manufacturer Shibaura Kukje Engine Model Not Published A1100N2 Engine Type 3-cylinder diesel, liquid-cooled Four-stroke, naturally aspirated, indirect injection, water-cooled diesel No. of Cylinders 3 3 Displacement 91.5 in³ 71.7 in³ Rated Engine Speed 2600 rpm 2600 rpm Engine Power (Gross) 24 hp 24 hp PTO Power 19.2 hp 16.9 hp Engine Emissions Constraints Tier 4 Tier 4 Cooling System Type Liquid-cooled Water-cooled Air Cleaner Not Published Not Published Fuel System Indirect low-pressure injection Indirect Injection Alternator Not Published 50 A, 12 V ▶ HydraulicsPump Type Gear-type pump Not Published Implement Flow Not Published 4.5 gpm Steering Flow 3.8 gpm Not Published Total Hydraulic Flow 10.5 gpm 7.1 gpm Overall Hydraulic Pump Flow Not Published 7.1 gpm Hydraulic System Type Open center Open Center Rear Remote Hydraulic Flow 6.7 gpm Not Published No. of Standard Remote Valves Not Published Not Published No. of Optional Remote Valves Up to 2 Not Published ▶ Fluid CapacityFuel Tank Capacity 10.04 gal 5.8 gal Coolant Capacity 1.32 gal 3.7 qt Crankcase Capacity 1.22 gal 2.3 qt Transmission / Hydraulic System Capacity 10.04 gal 15.3 qt Front Axle Fluid Capacity 1.48 gal Not Published ▶ PTO & HitchPTO Type Transmission driven Independent PTO Rear 540 rpm (1-3/8 in 6-spline) 540 @ 2550 rpm Mid-PTO Availability Not Published Available; 2000 @ 2550 rpm Category, 3-Point Hitch Category I CAT I with Check Chains Hitch Lift Capacity 2,205 lb 1,323 lb Hitch Lift Capacity (at 24”) 1,600 lb Not Published Lift Control Type Not Published Not Published ▶ Transmission & DrivetrainTransmission Type 9 x 3 mechanical shift constant mesh gears or 3-range hydrostatic HST - 2 range No. of Speeds Gear: 9F / 3R; HST: 3-range infinite Infinite Max Travel Speed (Forward) Not Published Not Published Max Travel Speed (Reverse) Not Published Not Published Clutch Gear: dry single disc Dry-Single Differential Lock & Limited Slip Options Mechanical engagement via heel pedal Mechanical rear differential lock ▶ Chassis, Steering & ControlsFrame Type Not Published Not Published Steering Power steering Power steering Brakes Internal wet brakes, single brake pedal on HST, two brake pedals on gear models Wet Disc Seat Suspension & Adjustability Suspended vinyl seat with retractable seatbelt, fixed steering wheel Not Published Front Axle Type Cast-steel 4WD front axle, center driveline, bevel-gear final drives Not Published Front Axle Rating Not Published Not Published Drawbar Capacity Not Published Not Published ▶ Dimensions & ManeuverabilityOverall Width 52.4 in 45.8 in Wheelbase 65.9 in 57.5 in Ground Clearance Not Published 9.4 in Min. Turn Radius without Brakes Not Published 7.2 ft Height to Top of ROPS 97.6 in 91.3 in Height to Top of ROPS (folded) 63.8 in Not Published Height to Top of Cab Model Not Published 78.2 in Overall Length 116 in (without 3-point hitch) 100.5 in ▶ WeightTractor Weight (Base) HST: 2,657 lb 1,638 lb Weight with ROPS and Loader Not Published Not Published Weight with Cab and Loader Not Published 2,419 lb (1,870 + 549, computed; 25LSK loader shipping weight) ▶ Tire OptionsTire Size & Options Not Published AG, IND, TURF R1 Agricultural - Front Not Published 6x12 R1 Agricultural - Rear Not Published 9.5x16 R3 Turf - Front Not Published 20x8-10 R3 Turf - Rear Not Published 29x12.5-15 R4 Industrial - Front Not Published 20x8-10 R4 Industrial - Rear Not Published 27x12.5-15 ▶ Loader & AttachmentsQuick Attach Loader System L105E: skid steer or pin-type implement attachments 25LSK: Skid steer style quick coupler, standard Loader Model L105E 25LSK Loader Lift Height L105E: 95.7 in (at pivot pin) 25LSK: 75.3 in Loader Lift Capacity (Full Height) L105E: 1,210 lb (at pivot pin, full height) 25LSK: 900 lb Loader Breakout Force L105E: 1,460 lb (at pivot pin) 25LSK: 2,000 lb ▶ WarrantyWarranty Length & Coverage 5-year powertrain warranty Not Published ▶ ITC Company AccessoriesAccessories that fit None tagged yet 
