Massey Ferguson 1734E vs Mahindra 3616 | Side-by-side comparison | ITC Resource Center
Compare Tractors
See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
Front Mounted, Engine Driven, Pressure Loading Gear Type
Implement Flow
Not Published
7.7 gpm at 2600 rpm
Steering Flow
3.8 gpm
3.4 gpm at 2600 rpm
Total Hydraulic Flow
10.5 gpm
Not Published
Overall Hydraulic Pump Flow
Not Published
Not Published
Hydraulic System Type
Open center
Open center
Rear Remote Hydraulic Flow
6.7 gpm
Not Published
No. of Standard Remote Valves
Not Published
Not Published
No. of Optional Remote Valves
Up to 2
1 (optional)
Fuel Tank Capacity
10.04 gal
7.1 gal
Coolant Capacity
1.32 gal
Not Published
Crankcase Capacity
1.22 gal
Not Published
Transmission / Hydraulic System Capacity
10.04 gal
Not Published
Front Axle Fluid Capacity
1.48 gal
Not Published
PTO Type
Not Published
Gear Drive: independent; Hydrostatic Drive: live, with internal overrunning clutch
PTO Rear
540 rpm (1-3/8 in 6-spline)
540 rpm @ 2376 rpm
Mid-PTO Availability
Not Published
Optional, 2000 rpm @ 2525 rpm
Category, 3-Point Hitch
Category I
Category I
Hitch Lift Capacity
2,205 lb
2,646 lb
Hitch Lift Capacity (at 24”)
1,600 lb
1,720 lb
Lift Control Type
Not Published
Position control
Transmission Type
9 x 3 mechanical shift constant mesh gears or 3-range hydrostatic
Gear Drive: synchromesh shuttle and constant-mesh main gear shift, two ranges of selective sliding gears; Hydrostatic Drive: HST, three ranges of selective sliding gears
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
