▶ EngineEngine Manufacturer Shibaura KIOTI (Daedong) Engine Model Shibaura N843T-F CK4010: 3H-TM4A; CK4010 HST: 3H-TH4A Engine Type 3-cylinder diesel, liquid-cooled, turbocharged 3 cylinder, in-line vertical, water-cooled 4-cycle diesel, CRDI No. of Cylinders 3 3 Displacement 91.5 in³ 111.4 in³ Rated Engine Speed 2800 rpm 2600 rpm Engine Power (Gross) 38.5 hp 39.6 hp PTO Power Gear: 32.7 hp; HST: 30.9 hp CK4010: 34.8 hp; CK4010 HST: 33.3 hp Engine Emissions Constraints Tier 4 Tier 4 Cooling System Type Liquid-cooled Water-cooled Air Cleaner Not Published Not Published Fuel System Turbocharged, indirect low-pressure injection Common rail direct injection Alternator Not Published 75 A, 12 V ▶ HydraulicsPump Type Gear-type pump Gear Implement Flow Not Published Not Published Steering Flow 4.1 gpm Not Published Total Hydraulic Flow 11.3 gpm 11.7 gpm Overall Hydraulic Pump Flow Not Published 11.7 gpm Hydraulic System Type Open center Open center Rear Remote Hydraulic Flow 7.2 gpm Not Published No. of Standard Remote Valves Not Published 0 (2 optional) No. of Optional Remote Valves Up to 2 2 (4 ports) ▶ Fluid CapacityFuel Tank Capacity 10.0 gal 9.0 gal Coolant Capacity 1.32 gal Not Published Crankcase Capacity 1.22 gal Not Published Transmission / Hydraulic System Capacity 10.04 gal Not Published Front Axle Fluid Capacity 1.48 gal Not Published ▶ PTO & HitchPTO Type Gear: independent; HST: transmission driven with overrunning clutch Live PTO Rear 540 rpm (1-3/8 in 6-spline) 540 rpm Mid-PTO Availability Not Published Optional, 2,000 rpm Category, 3-Point Hitch Category I Category I Hitch Lift Capacity 2,205 lb 1,631 lb at 24 in Hitch Lift Capacity (at 24”) 1,600 lb 1,631 lb Lift Control Type Not Published Position control ▶ Transmission & DrivetrainTransmission Type 9 x 3 mechanical shift constant mesh gears or 3-range hydrostatic CK4010: Manual; CK4010 HST: Hydrostatic No. of Speeds Gear: 9F / 3R; HST: 3-range infinite CK4010: 9F/3R; CK4010 HST: Infinite, 3 range Max Travel Speed (Forward) Not Published CK4010: 14.62 mph; CK4010 HST: 14.85 mph Max Travel Speed (Reverse) Not Published CK4010: 9.55 mph; CK4010 HST: 13.37 mph Clutch Gear: dry single disc CK4010: Dry dual stage; CK4010 HST: Dry single stage Differential Lock & Limited Slip Options Mechanical engagement via heel pedal Rear differential lock (standard) ▶ Chassis, Steering & ControlsFrame Type Not Published Not Published Steering Power steering Hydrostatic power steering Brakes Internal wet brakes, single brake pedal on HST, two brake pedals on gear models Wet multi-disc Seat Suspension & Adjustability Suspended vinyl seat with retractable seatbelt, fixed steering wheel Not Published Front Axle Type Cast steel 4WD front axle with center drive line and bevel-gear final drives 4WD, mechanical engagement (standard) Front Axle Rating Not Published Not Published Drawbar Capacity Not Published Not Published ▶ Dimensions & ManeuverabilityOverall Length with 3-Point Hitch 116.0 in (w/o 3-point linkage) (without 3-point hitch) 120.9 in Overall Width 52.4 in 55.1 in Wheelbase 65.9 in 65.7 in Ground Clearance Not Published 13.4 in Min. Turn Radius without Brakes Not Published 8.0 ft (with brake applied) Height to Top of ROPS 97.6 in 99.2 in Height to Top of ROPS (folded) 63.8 in Not Published Height to Top of Cab Model Not Published 91.7 in ▶ WeightTractor Weight (Base) Gear: 2,756 lb; HST: 2,789 lb CK4010: 2,679 lb; CK4010 HST: 2,734 lb Weight with ROPS and Loader Not Published Not Published Weight with Cab and Loader Not Published Not Published ▶ Tire OptionsTire Size & Options R3 Turf, R4 Industrial Front AG 7-16 (Turf 28x8.5-15/6, Industrial 27x8.5-15); Rear AG 11.2-24 (Turf 41x14-20/4, Industrial 15-19.5) R1 Agricultural - Front Not Published 7-16 R1 Agricultural - Rear Not Published 11.2-24 R3 Turf - Front 27x8.50-15 28x8.5-15/6 R3 Turf - Rear 38x14.00-20 41x14-20/4 R4 Industrial - Front 27x8.50-15 27x8.5-15 R4 Industrial - Rear 15x19.5 15-19.5 ▶ Loader & AttachmentsQuick Attach Loader System L105E: skid steer or pin-type implement attachments Quick attach (QA) bucket, 60 in or 66 in Loader Model L105E KL4010; KL4030 Loader Lift Height L105E: 95.7 in 98.4 in (KL4010 and KL4030 loaders) Loader Lift Capacity (Full Height) L105E: 1,210 lb 1,835 lb (KL4010 and KL4030 loaders) Loader Breakout Force L105E: 1,460 lb 3,464 lb (KL4010 and KL4030 loaders) ▶ WarrantyWarranty Length & Coverage 5-year powertrain warranty Limited: Tractors (Non-Commercial Application) 24 months parts & labor; Extended (driveline): 48 months parts & labor ▶ ITC Company AccessoriesAccessories that fit None tagged yet 
