▶ EngineEngine Manufacturer Shibaura TYM Engine Model N4LDI-T n/a Engine Type 4-cylinder, turbocharged, liquid-cooled diesel 4-cylinder, naturally aspirated diesel No. of Cylinders 4 4 Displacement 135.2 in³ 139.5 in³ Rated Engine Speed 2600 rpm 2600 rpm Engine Power (Gross) 48.8 hp 48.3 hp PTO Power Gear: 41.4 hp; HST: 39 hp 37.2 hp Engine Emissions Constraints Tier 4 Tier 4 Cooling System Type Liquid-cooled Not Published Air Cleaner Primary and secondary elements Single dry Fuel System Electronically controlled high-pressure common rail IDI Alternator 90 A 70 A, 12 V ▶ HydraulicsPump Type Gear-type single pump Dual gear pump Implement Flow Not Published 7.7 gpm Steering Flow Not Published 4.3 gpm Total Hydraulic Flow 12.4 gpm 11.9 gpm Overall Hydraulic Pump Flow 12.4 gpm 11.9 gpm Hydraulic System Type Open center Open center Rear Remote Hydraulic Flow Not Published Not Published No. of Standard Remote Valves 0 2 No. of Optional Remote Valves 1 factory-installed; up to 3 field-installed Not Published ▶ Fluid CapacityFuel Tank Capacity 14 gal 17.0 gal Coolant Capacity 1.66 gal 6.9 qt Crankcase Capacity 1.53 gal 6.8 qt Transmission / Hydraulic System Capacity 10.04 gal 9.2 gal Front Axle Fluid Capacity 2.21 gal 10.5 qt ▶ PTO & HitchPTO Type Independent, electro-hydraulically engaged Independent PTO Rear 540 rpm (1-3/8 in 6-spline) 540 rpm Mid-PTO Availability No mid-PTO Optional Category, 3-Point Hitch Category I and II Category I Hitch Lift Capacity Not Published 3,822 lb Hitch Lift Capacity (at 24”) 2,425 lb 3,050.6 lb Lift Control Type Not Published Position control/Draft ▶ Transmission & DrivetrainTransmission Type Gear: 8 x 8 (4-speed x 2 sub-range) Syncro-Shuttle; HST: 3-range mechanical HST Synchro-shuttle No. of Speeds Gear: 8 forward and 8 reverse; HST: infinite forward and reverse (3-range) F8 x R8 Max Travel Speed (Forward) Not Published 18.6 mph Max Travel Speed (Reverse) Not Published Not Published Clutch Dry single-disc Dry single plate Differential Lock & Limited Slip Options Mechanical engagement (Gear: right side heel pedal; HST: left side heel pedal) Not Published ▶ Chassis, Steering & ControlsFrame Type Not Published Not Published Steering Power steering Hydrostatic Brakes Internal wet disc, 2 pedals (Gear: right hand; HST: left hand) Wet disc Seat Suspension & Adjustability Suspended vinyl seat with retractable seatbelt Not Published Front Axle Type Cast steel 4WD front axle with center drive line and bevel-gear final drives 4WD Front Axle Rating Not Published Not Published Drawbar Capacity Not Published Not Published ▶ Dimensions & ManeuverabilityOverall Length with 3-Point Hitch 133 in 141.3 in Overall Width 74 in 63.8 in Wheelbase 78 in 76.2 in Ground Clearance Not Published 13.8 in Min. Turn Radius without Brakes Not Published 131.5 in Height to Top of ROPS 104 in 102.1 in Height to Top of ROPS (folded) 80 in Not Published Height to Top of Cab Model Not Published Not Applicable ▶ WeightTractor Weight (Base) Gear: 3,836 lb; HST: 3,880 lb n/a Weight with ROPS and Loader Not Published Not Published Weight with Cab and Loader Not Published Not Applicable ▶ Tire OptionsTire Size & Options R1 ag: 9.5x16 front, 13.6x28 or 16.9x24 rear; R3 turf: 27x10.50-15 front, 44x18.00-20 rear; R4 industrial: 10-16.5 front, 17.5L-24 rear R1 Agricultural, R3 Turf, R4 Industrial R1 Agricultural - Front 9.5x16 Farm Specialist 9.5-16 NHS TL 6PR R1 Agricultural - Rear 13.6x28; 16.9x24 Farm Specialist 13.6-26 NHS TL 6PR R3 Turf - Front 27x10.50-15 Multi-Trac CS 27x10.50-15 NHS TL 4PR R3 Turf - Rear 44x18.00-20 Multi-Trac CS 44x18.00-20 NHS TL 4PR R4 Industrial - Front 10-16.5 Trac Chief 12-16.5 NHS TL 6PR R4 Industrial - Rear 17.5L-24 Xtra Grip 17.5L-24 NHS TL 6PR ▶ Loader & AttachmentsQuick Attach Loader System L135E: optional skid steer tool carrier TX57: Quick attachment assembly Loader Model L135E n/a Loader Lift Height L135E: 110.2 in 109.4 in Loader Lift Capacity (Full Height) L135E: 2,430 lb 2,790 lb Loader Breakout Force L135E: 2,870 lb 5,316 lb ▶ WarrantyWarranty Length & Coverage 5-year powertrain warranty Up to 2 years or until the 2,000 hours mark, bumper-to-bumper warranty; 3000 hours maximum coverage period for parts and labour on drivetrains or powertrains; 12-months warranty period for implements, including loaders and backhoes. ▶ ITC Company AccessoriesAccessories that fit None tagged yet 
