Massey Ferguson 2850E vs Mahindra 3550 | Side-by-side comparison | ITC Resource Center
Compare Tractors
See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
Every published spec, side by side, including the details the graphs above don't chart.
Spec
Massey Ferguson2850E
Mahindra3550
Engine Manufacturer
Iseki
Mahindra
Engine Model
Not Published
Not Published
Engine Type
4-cylinder, turbocharged, liquid-cooled diesel
Naturally aspirated direct injection diesel
No. of Cylinders
4
4
Displacement
148.6 in³
166.7 in³
Rated Engine Speed
2600 rpm
2800 rpm
Engine Power (Gross)
48.8 hp
49 hp
PTO Power
Mech: 40.7 hp; HST: 38.5 hp
PST, PST Cab: 40 hp; HST, HST Cab: 39.5 hp
Engine Emissions Constraints
Tier 4
Tier 4
Cooling System Type
Liquid cooled
Water-cooled
Air Cleaner
Not Published
Not Published
Fuel System
Not Published
Direct injection
Alternator
Not Published
ROPS: 45 A, 12 V; Cab: 120 A, 12 V
Pump Type
Two gear-type pumps for steering and 3-point/remotes
Not Published
Implement Flow
12.6 gpm
11 gpm
Steering Flow
7.0 gpm
5 gpm
Total Hydraulic Flow
19.6 gpm (12.6 + 7.0, computed)
16 gpm (11 + 5, computed)
Overall Hydraulic Pump Flow
19.6 gpm (12.6 + 7.0, computed)
Not Published
Hydraulic System Type
Open center
Open center
Rear Remote Hydraulic Flow
Not Published
Not Published
No. of Standard Remote Valves
Not Published
1
No. of Optional Remote Valves
Not Published
Not Published
Fuel Tank Capacity
14 gal
11.3 gal (3550 PST); 11.3 gal (3550 HST); 14.5 gal (3550 PST Cab); 14.5 gal (3550 HST Cab)
Coolant Capacity
Not Published
Not Published
Crankcase Capacity
Not Published
Not Published
Transmission / Hydraulic System Capacity
Not Published
Not Published
Front Axle Fluid Capacity
Not Published
Not Published
PTO Type
Independent with SoftStart electronic modulation
Independent
PTO Rear
540 rpm (1-3/8 in)
540 rpm @ 2404 rpm
Mid-PTO Availability
Not Published
Not Published
Category, 3-Point Hitch
Category I and II
Category 1/2 with telescopic stabilizers & flex links
Hitch Lift Capacity
2,645 lb
3,090 lb
Hitch Lift Capacity (at 24”)
2,425 lb
Not Published
Lift Control Type
Not Published
Position and draft control
Transmission Type
8x8 synchro shuttle or 3-range hydrostatic
Power shuttle with full synchro mesh (3550 PST); HST, 3 ranges (3550 HST); Power shuttle with full synchro mesh (3550 PST Cab); HST, 3 ranges (3550 HST Cab)
No. of Speeds
Mech: 8 forward and 8 reverse; HST: infinite forward and reverse (3-range)
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
