Massey Ferguson 2860E | Side-by-side comparison | ITC Resource Center
Compare Tractors
See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
2 of 4 selected
n/a
MasseyFerguson2860E
n/a
MasseyFergusonMF1755E
Comparison loaded for 2 tractors.
Full Spec Sheet
Every published spec, side by side, including the details the graphs above don't chart.
Spec
Massey Ferguson2860E
Engine Manufacturer
Iseki
Engine Model
Not Published
Engine Type
4-cylinder, turbocharged, liquid-cooled diesel
No. of Cylinders
4
Displacement
148.6 in³
Rated Engine Speed
2600 rpm
Engine Power (Gross)
57.3 hp
PTO Power
Mech: 48 hp; HST: 45.3 hp
Engine Emissions Constraints
Tier 4
Cooling System Type
Liquid cooled
Air Cleaner
Not Published
Fuel System
Not Published
Alternator
Not Published
Pump Type
Two gear-type pumps for steering and 3-point/remotes
Implement Flow
12.6 gpm
Steering Flow
7.0 gpm
Total Hydraulic Flow
19.6 gpm (12.6 + 7.0, computed)
Overall Hydraulic Pump Flow
19.6 gpm (12.6 + 7.0, computed)
Hydraulic System Type
Open center
Rear Remote Hydraulic Flow
Not Published
No. of Standard Remote Valves
Not Published
No. of Optional Remote Valves
Not Published
Fuel Tank Capacity
14 gal
Coolant Capacity
Not Published
Crankcase Capacity
Not Published
Transmission / Hydraulic System Capacity
Not Published
Front Axle Fluid Capacity
Not Published
PTO Type
Independent with SoftStart electronic modulation
PTO Rear
540 rpm (1-3/8 in)
Mid-PTO Availability
Not Published
Category, 3-Point Hitch
Category I and II
Hitch Lift Capacity
2,645 lb
Hitch Lift Capacity (at 24”)
2,425 lb
Lift Control Type
Not Published
Transmission Type
8x8 synchro shuttle or 3-range hydrostatic
No. of Speeds
Mech: 8 forward and 8 reverse; HST: infinite forward and reverse (3-range)
