▶ EngineEngine Manufacturer Shibaura Daedong Engine Model N843 CK30: 3A150LWM; CK30 HST: 3A150LWH Engine Type 3-cylinder naturally aspirated diesel 3 cylinder, in-line vertical, water-cooled 4-cycle diesel No. of Cylinders 3 3 Displacement 91.3 in³ 91.5 in³ Rated Engine Speed 2600 rpm 2600 rpm Engine Power (Gross) 30 hp 30 hp PTO Power Gear: 25.5 hp; Hydrostatic: 24 hp CK30: 23 hp; CK30 HST: 22 hp Engine Emissions Constraints Not Published Tier 2 Cooling System Type Liquid-cooled Water-cooled Air Cleaner Not Published Not Published Fuel System Not Published Not Published Alternator Not Published 50 A, 12 V ▶ HydraulicsPump Type Gear Gear (tandem) Implement Flow 6.2 gpm Not Published Steering Flow 3.8 gpm Not Published Total Hydraulic Flow 10.0 gpm (6.2 + 3.8, computed) 12.7 gpm Overall Hydraulic Pump Flow 10.0 gpm (6.2 + 3.8, computed) 12.7 gpm Hydraulic System Type Open center Open center Rear Remote Hydraulic Flow Not Published Not Published No. of Standard Remote Valves Not Published 0 No. of Optional Remote Valves Not Published 2 ▶ Fluid CapacityFuel Tank Capacity 7.1 gal 7.9 gal Coolant Capacity Not Published Not Published Crankcase Capacity Not Published 6.1 qt Transmission / Hydraulic System Capacity Not Published CK30: 7.1 gal; CK30 HST: 7.9 gal Front Axle Fluid Capacity Not Published Not Published ▶ PTO & HitchPTO Type Live (FWD); transmission-driven (2WD gear) Live PTO Rear Gear 2WD: transmission-driven 540 rpm; Gear FWD: live 540 rpm; Hydrostatic FWD: live 540 rpm 540 rpm (1,000 rpm optional) Mid-PTO Availability Optional on gear transmission: 2WD gear transmission-driven with overrunning clutch, 2000 rpm; FWD gear and hydrostatic: live 2000 rpm Optional, 2,000 rpm Category, 3-Point Hitch Category I Category I Hitch Lift Capacity Not Published Not Published Hitch Lift Capacity (at 24”) 1,635 lb 1,764 lb Lift Control Type Not Published Position control ▶ Transmission & DrivetrainTransmission Type Gear: 9x3; Hydrostatic: 3-range (FWD only) CK30: Synchro shuttle; CK30 HST: Hydrostatic No. of Speeds Gear: 9F/3R; Hydrostatic: 3 ranges CK30: 8F/8R; CK30 HST: Infinite, 3 range Max Travel Speed (Forward) Gear: 12.9 mph (R1 tires), 12.1 mph (R4 tires); Hydrostatic: 14.5 mph (R1 tires), 13.6 mph (R4 tires) CK30: 14.91 mph; CK30 HST: 13.07 mph Max Travel Speed (Reverse) Not Published CK30: 13.14 mph; CK30 HST: 9.15 mph Clutch Not Published CK30: Dry dual; CK30 HST: Dry single Differential Lock & Limited Slip Options Mechanical rear differential lock (heel pedal) Mechanical rear differential lock (standard) ▶ Chassis, Steering & ControlsFrame Type Not Published Not Published Steering Power steering Hydrostatic power steering Brakes Wet disc Wet disc Seat Suspension & Adjustability Padded contoured seat on an inclined track Not Published Front Axle Type FWD (standard); 2WD (optional) 4WD, bevel gear type Front Axle Rating Not Published Not Published Drawbar Capacity Not Published Not Published ▶ Dimensions & ManeuverabilityOverall Length with 3-Point Hitch 2WD, ag tires: 108.9 in; FWD, R4 tires: 111.4 in (both with 3-point hitch raised) 122.2 in Overall Width 54.3 in (minimum, ag tires); 62 in (R4 tires) 54.6 in Wheelbase 63.0 in 66.1 in Ground Clearance Not Published 13.82 in Min. Turn Radius without Brakes Not Published 9.5 ft (with brake applied) Height to Top of ROPS 82.3 in (R4 tires) 96.8 in Height to Top of ROPS (folded) Not Published Not Published Height to Top of Cab Model Not Published Not Published ▶ WeightTractor Weight (Base) 2,193 lb (2WD, ag tires, 9x3 gear); 2,385 lb (FWD, R4 tires, 9x3 gear) CK30: 3,184 lb; CK30 HST: 3,142 lb Weight with ROPS and Loader Not Published Not Published Weight with Cab and Loader Not Published Not Published ▶ Tire OptionsTire Size & Options R1 Ag 7.4x14 / 11.2x24; R3 Turf 24x8.50-14 / 13.6x16; R4 Industrial 25x8.50-14 / 15x19.5 Front AG 7-14 (Turf 27x8.50-15, Industrial 25x8.50-14); Rear AG 11.2-24 (Turf 41x14.00-20, Industrial 15-19.5) R1 Agricultural - Front Not Published 7-14 R1 Agricultural - Rear 11.2x24 11.2-24 R3 Turf - Front 24x8.50-14 27x8.50-15 R3 Turf - Rear 13.6x16 41x14.00-20 R4 Industrial - Front 25x8.50-14 25x8.50-14 R4 Industrial - Rear 15x19.5 15-19.5 ▶ Loader & AttachmentsQuick Attach Loader System Not Published Not Published Loader Model 7308 KL130 Loader Lift Height 7308: 100.5 in KL130: 92.5 in Loader Lift Capacity (Full Height) 7308: 875 lb KL130: 1,155 lb (at pivot pins, full height) Loader Breakout Force 7308: 1,602 lb KL130: 2,046 lb (at pivot pins) ▶ WarrantyWarranty Length & Coverage Not Published Not Published ▶ ITC Company AccessoriesAccessories that fit None tagged yet 
