New Holland Workmaster 75 | Side-by-side comparison | ITC Resource Center
Compare Tractors
See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
2 of 4 selected
n/a
NewHollandWorkmaster75
n/a
CaseIHFarmall80N
Comparison loaded for 2 tractors.
Full Spec Sheet
Every published spec, side by side, including the details the graphs above don't chart.
Spec
New HollandWorkmaster 75
Engine Manufacturer
FPT
Engine Model
S8000
Engine Type
Turbocharged 3-cylinder diesel
No. of Cylinders
3
Displacement
179 in³
Rated Engine Speed
2300 rpm
Engine Power (Gross)
74 hp
PTO Power
60 hp
Engine Emissions Constraints
Tier 4B Final
Cooling System Type
Not Published
Air Cleaner
PowerCore dry air cleaner
Fuel System
Bosch electronic high-pressure common rail
Alternator
120 A
Pump Type
Dual gear pumps
Implement Flow
12.6 gpm
Steering Flow
7.6 gpm
Total Hydraulic Flow
20.2 gpm
Overall Hydraulic Pump Flow
20.2 gpm
Hydraulic System Type
Open center
Rear Remote Hydraulic Flow
Not Published
No. of Standard Remote Valves
2
No. of Optional Remote Valves
1
Fuel Tank Capacity
21.7 gal
Coolant Capacity
Not Published
Crankcase Capacity
Not Published
Transmission / Hydraulic System Capacity
Not Published
Front Axle Fluid Capacity
Not Published
PTO Type
Fully independent, hydraulic wet clutch
PTO Rear
540 rpm (540/540E optional)
Mid-PTO Availability
Not Published
Category, 3-Point Hitch
Category I/II
Hitch Lift Capacity
Not Published
Hitch Lift Capacity (at 24”)
3,500 lb
Lift Control Type
Mechanical draft control (upper-link draft sensing)
Transmission Type
12x12 hydraulic power shuttle
No. of Speeds
12F/12R
Max Travel Speed (Forward)
25 mph
Max Travel Speed (Reverse)
Not Published
Clutch
11 in single dry disc
Differential Lock & Limited Slip Options
Mechanically engaged rear differential lock; limited-slip 4WD front axle with electro-hydraulic push-button engagement
