▶ EngineEngine Manufacturer Yanmar TYM Engine Model 3TNV80F-SDKTFF T1700N6 Engine Type Water cooled, 4-cycle diesel 3-cylinder, naturally aspirated diesel No. of Cylinders 3 3 Displacement 77.3 in³ 104.5 in³ Rated Engine Speed 3000 rpm 2100 rpm Engine Power (Gross) 24 hp 24 hp PTO Power 18.8 hp 21 hp Engine Emissions Constraints Tier 4 Tier 4 Cooling System Type Water cooled, forced circulation Not Published Air Cleaner Single element Dry element Fuel System Indirect fuel injection IDI (indirect injection) Alternator 40 A, 12 V 50 A, 12 V ▶ HydraulicsPump Type Gear Pump Dual gear pump Implement Flow 4.18 gpm 7.7 gpm Steering Flow 2.77 gpm 4.2 gpm Total Hydraulic Flow 6.95 gpm 11.9 gpm Overall Hydraulic Pump Flow 6.95 gpm 11.9 gpm Hydraulic System Type Live, independent Open center Rear Remote Hydraulic Flow Not Published Not Published No. of Standard Remote Valves 1 Loader: 2 / Rear: 0 No. of Optional Remote Valves Not Published Up to 4 ▶ Fluid CapacityFuel Tank Capacity 5.81 gal 7.1 gal Coolant Capacity 0.96 gal 5.3 qt Crankcase Capacity 0.71 gal 4.5 qt Transmission / Hydraulic System Capacity 3.83 gal 2515R: 9 gal; 2515H: 9.8 gal Front Axle Fluid Capacity 0.85 gal 6.8 qt ▶ PTO & HitchPTO Type Independent Independent PTO Rear 540 rpm 540 rpm Mid-PTO Availability Standard, 2,000 rpm @ 2,875 rpm Not Published Category, 3-Point Hitch Category I Category I Hitch Lift Capacity 1,323 lb 3,306 lb Hitch Lift Capacity (at 24”) 1,058 lb 2,425 lb Lift Control Type Position Position control ▶ Transmission & DrivetrainTransmission Type Hydraulic + mechanical H/L with constant-mesh 2515R: Synchromesh; 2515H: HST No. of Speeds 2 ranges (high/low), infinite forward and reverse 2515R: F12 x R12; 2515H: 3-Range Max Travel Speed (Forward) 11.2 mph 2515R: 11.7 mph; 2515H: 15.2 mph Max Travel Speed (Reverse) Not Published 2515R: 11.6 mph; 2515H: 15.2 mph Clutch Electro-hydraulic PTO clutch assembly (hydrostatic drive, no traction clutch) 2515R: Dry single plate; 2515H: None (HST) Differential Lock & Limited Slip Options 4WD with differential lock (bevel gears with diff-lock) Differential lock (standard) ▶ Chassis, Steering & ControlsFrame Type Rigid unit: transmission case, engine and front axle support bolted together Not Published Steering Hydrostatic power steering Hydrostatic power steering Brakes Wet Disc, Foot operated, independent with provision of inter lock for simultaneous operation Wet, multi-disc Seat Suspension & Adjustability Suspension seat with armrests & retractable seat belt Suspension seat Front Axle Type 4WD, center-pivot reverse Eliot type Not Published Front Axle Rating Not Published Not Published Drawbar Capacity Not Published Not Published ▶ Dimensions & ManeuverabilityOverall Length with 3-Point Hitch 100.5 in 120.9 in Overall Width 45.8 in 56.3 in Wheelbase 57.5 in 65.7 in Ground Clearance 9.4 in 14.4 in Min. Turn Radius without Brakes Not Published L: 124.8 in; R: 121.3 in Height to Top of ROPS 91.3 in 97.3 in Height to Top of ROPS (folded) Not Published Not Published Height to Top of Cab Model Not Published Not Published ▶ WeightTractor Weight (Base) 1,610 lb 2515R: 2,989 lb; 2515H: 2,969 lb Weight with ROPS and Loader 2,091 lb 2515R: 3,997 lb; 2515H: 3,977 lb Weight with Cab and Loader Not Published Not Published ▶ Tire OptionsTire Size & Options R4 Industrial (Std), R3 Turf (Opt) R1 Ag (Opt), Goodyear R14 (Opt) R1 Agricultural 8-16 / 12.4-24; R3 Turf 27x8.5-15 / 41x14.00; R4 Industrial 10-16.5 / 420/70-24; optional R1 8.0-16 / 12.4-24 and R4 25x8.50-14 / 15x19.5 R1 Agricultural - Front 6-12 8-16 R1 Agricultural - Rear 9.5-16 12.4-24 R3 Turf - Front 20x8-10 27x8.5-15, 6PR R3 Turf - Rear 29x12.5-15 41x14.00, 4PR R4 Industrial - Front 20x8-10 10-16.5, 6PR R4 Industrial - Rear 27x12.5-15 420/70-24, 6PR ▶ Loader & AttachmentsQuick Attach Loader System L75: skid-steer compatible quick-attach BL150: Quick attach assembly (lever-lock) Loader Model L75 BL150 Loader Lift Height L75: 75.3 in (maximum lift height to pivot pin) BL150: 104.9 in Loader Lift Capacity (Full Height) L75: 947 lb (at pivot pin, to full height) BL150: 2,200 lb Loader Breakout Force L75: 1,680 lb (at pivot pin) BL150: 3,422 lb ▶ WarrantyWarranty Length & Coverage Full machine: 2 years or 2,000 hours; Powertrain: 8 years or 3,000 hours (no deductible, parts and labor) 24 months or 2,000 hours bumper-to-bumper (parts and labor); 72 months or 3,000 hours powertrain (non-commercial use, 20 to 70 engine hp); 12 months on front-end loaders, backhoes and mid-mount mowers ▶ ITC Company AccessoriesAccessories that fit 
