▶ EngineEngine Manufacturer Yanmar TYM Engine Model 3TNV80F T1100N2 Engine Type Water cooled, 4-cycle diesel 3-cylinder, naturally aspirated diesel No. of Cylinders 3 3 Displacement 77.3 in³ 71.7 in³ Rated Engine Speed 3000 rpm 2800 rpm Engine Power (Gross) 24 hp 24 hp PTO Power 18.8 hp 18.3 hp Engine Emissions Constraints Tier 4 Tier 4 Cooling System Type Water cooled, forced circulation Water-cooled Air Cleaner Single element Single dry Fuel System Indirect fuel injection IDI Alternator 40 A, 12 V 50 A, 12 V ▶ HydraulicsPump Type Not Published Dual gear pump Implement Flow 4.18 gpm 4.4 gpm Steering Flow 2.77 gpm 2.7 gpm Total Hydraulic Flow 6.95 gpm 7.1 gpm Overall Hydraulic Pump Flow 6.95 gpm 7.1 gpm Hydraulic System Type Live, independent Open center Rear Remote Hydraulic Flow Not Published Not Published No. of Standard Remote Valves 1 None No. of Optional Remote Valves Not Published 1 ▶ Fluid CapacityFuel Tank Capacity 5.81 gal 6.6 gal Coolant Capacity 0.96 gal 5.9 qt Crankcase Capacity 0.71 gal 4.5 qt Transmission / Hydraulic System Capacity 3.83 gal 4.7 gal Front Axle Fluid Capacity 0.85 gal 4.7 qt ▶ PTO & HitchPTO Type Independent Independent PTO Rear 540 rpm 540 rpm Mid-PTO Availability 2,000 rpm Available Category, 3-Point Hitch Category I Category I Hitch Lift Capacity 1,323 lb 1,534 lb Hitch Lift Capacity (at 24”) 1,058 lb 1,102 lb Lift Control Type Position Position control ▶ Transmission & DrivetrainTransmission Type 2-range hydrostatic HST No. of Speeds 2 ranges (high/low), infinite forward and reverse Infinite 2-Range Max Travel Speed (Forward) 11.2 mph 12.9 mph Max Travel Speed (Reverse) Not Published Not Published Clutch Electro-hydraulic PTO clutch assembly (hydrostatic drive, no traction clutch) Dry single plate Differential Lock & Limited Slip Options 4WD with differential lock (bevel gears with diff-lock) Differential lock ▶ Chassis, Steering & ControlsFrame Type Unit frame: engine, transmission and front axle support bolted together into a rigid assembly Not Published Steering Hydrostatic power steering Hydrostatic Brakes Wet disc, independent foot pedals that lock together Wet disc Seat Suspension & Adjustability Suspension seat with armrests & retractable seat belt Adjustable seat (sliding) Front Axle Type 4WD, center-pivot reverse Eliot type 4WD center-pivot, reverse Eliot type Front Axle Rating Not Published Not Published Drawbar Capacity Not Published Not Published ▶ Dimensions & ManeuverabilityOverall Width 45.8 in 52.8 in Wheelbase 57.5 in 58.3 in Ground Clearance 9.4 in 7.7 in Min. Turn Radius without Brakes Not Published 105.5 in Height to Top of ROPS 91.3 in 89.8 in Height to Top of ROPS (folded) Not Published Not Published Height to Top of Cab Model Not Published Not Published Overall Length 100.5 in 107.8 in (with 3-point hitch) ▶ WeightTractor Weight (Base) 1,610 lb 1,881 lb (with ROPS) Weight with ROPS and Loader 2,091 lb (1,610 + 481, computed) 2,564 lb (1,881 + 683, computed; TX2000 loader with bucket) Weight with Cab and Loader Not Published Not Published ▶ Tire OptionsTire Size & Options Titan: R4 Industrial (Std), R3 Turf (Opt), R1 Agricultural (Opt), R14 (Opt) R3 Turf, R4 Industrial, R4 Lg Industrial R1 Agricultural - Front 6-12 Not Published R1 Agricultural - Rear 9.5-16 Not Published R3 Turf - Front 20x8-10 Turf Master 23x8.50-12 NHS TL 4PR R3 Turf - Rear 29x12.5-15 Multi-Trac CS 33x12.50-16.5 NHS TL 4PR R4 Industrial - Front 20x8-10 Trac Chief 23x8.50-12 NHS TL 4PR R4 Industrial - Rear 27x12.5-15 Trac Chief 12-16.5 NHS TL 6PR ▶ Loader & AttachmentsQuick Attach Loader System L75: skid-steer compatible quick-attach TX2000: Quick attach mechanism Loader Model L75 TX2000 Loader Lift Height L75: 75.3 in (maximum lift height to pivot pin) TX2000: 86.9 in Loader Lift Capacity (Full Height) L75: 947 lb (at pivot pin, to full height) TX2000: 1,380 lb (at pivot pin) Loader Breakout Force L75: 1,680 lb (at pivot pin) TX2000: 2,059 lb (at pivot pin, ground level) ▶ WarrantyWarranty Length & Coverage Government and non-institutional: basic 24 months or 2,000 hours, powertrain 96 months or 3,000 hours; all other use: basic 24 months or 2,000 hours, powertrain 36 months or 3,000 hours Basic 24 months or 2,000 hours, parts and labor; non-commercial, 20 to 70 engine hp: powertrain 72 months or 3,000 hours; loaders, backhoes and mid-mount mowers 12 months ▶ ITC Company AccessoriesAccessories that fit 
