Solis H24 vs TYM 2610 | Side-by-side comparison | ITC Resource Center
Compare Tractors
See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
Every published spec, side by side, including the details the graphs above don't chart.
Spec
SolisH24
TYM2610
PTO Power
Not Published
18 hp
Alternator
alternator
60 A, 12 V
Air Cleaner
NOT FOUND — air cleaner type not explicitly listed in any source reviewed.
Dry element
Engine Type
diesel
3-cylinder, naturally aspirated diesel
Fuel System
Direct Injection
IDI
Displacement
79.3 in³
71.7 in³
Engine Model
Mitsubishi S3L2
n/a
No. of Cylinders
3
3
Rated Engine Speed
2500 rpm
2800 rpm
Cooling System Type
Liquid cooled
liquid-cooled
Engine Manufacturer
Mitsubishi
TYM
Engine Power (Gross)
24 hp
24 hp
Engine Emissions Constraints
NOT FOUND — no emissions tier/standard (e.g. EPA Tier 4, EU Stage V) explicitly stated for the H24 in any source reviewed.
Tier 4
Weight with ROPS and Loader
Not Published
2,760 lb
Weight with Cab and Loader
Not Applicable
Not Applicable
Warranty Length & Coverage
3 Year or 2,000 Hour Bumper-to-Bumper Tractor Warranty; 7 Year or 3,000 Hour Limited Powertrain Tractor Warranty; 1 Year Implement/Attachment Warranty (such as Solis loaders)
Up to 2 years or until the 2,000 hours mark, bumper-to-bumper warranty; 3000 hours maximum coverage period for parts and labour on drivetrains or powertrains; 12-months warranty period for implements, including loaders and backhoes.
Pump Type
NOT FOUND
Single Gear Pump
Steering Flow
NOT FOUND — no source explicitly lists this value
4.3 gpm | 16.2 l/min
Implement Flow
3.98 gpm 15.1 lpm
3.1 gpm | 11.7 l/min
Total Hydraulic Flow
3.98 gpm
7.4 gpm | 28 l/min
Hydraulic System Type
open center
open center
Rear Remote Hydraulic Flow
NOT FOUND — no source explicitly lists this value
3.1 gpm 11.7 lpm
Overall Hydraulic Pump Flow
3.98 gpm 15.1 lpm
Total: 7.9 gpm [Implement: 4.65 gpm | Steering: 3.3 gpm] - Note: older/dealer spec sheets also cite 7.4 gpm total; 7.9 gpm appears on 2025 model listing
No. of Optional Remote Valves
NOT FOUND — no source explicitly lists this value
Optional (2)
No. of Standard Remote Valves
NOT FOUND — no source explicitly lists this value
0
PTO Rear
540 (1.375)
540 rpm
PTO Type
independent
Live
Lift Control Type
NOT FOUND — no source explicitly states lift control type (e.g., position control, draft control, or float) for the Solis H24
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
