TYM 2610 vs Solis H24 | Side-by-side comparison | ITC Resource Center
Compare Tractors
See horsepower, lift capacity, hydraulic flow, and the numbers that matter to your work. Up to 4 machines, side by side, in graphs built to show which tractor is better at what.
Every published spec, side by side, including the details the graphs above don't chart.
Spec
TYM2610
SolisH24
PTO Power
18 hp
Not Published
Alternator
60 A, 12 V
alternator
Air Cleaner
Dry element
NOT FOUND — air cleaner type not explicitly listed in any source reviewed.
Engine Type
3-cylinder, naturally aspirated diesel
diesel
Fuel System
IDI
Direct Injection
Displacement
71.7 in³
79.3 in³
No. of Cylinders
3
3
Rated Engine Speed
2800 rpm
2500 rpm
Cooling System Type
liquid-cooled
Liquid cooled
Engine Manufacturer
TYM
Mitsubishi
Engine Power (Gross)
24 hp
24 hp
Engine Emissions Constraints
Tier 4
NOT FOUND — no emissions tier/standard (e.g. EPA Tier 4, EU Stage V) explicitly stated for the H24 in any source reviewed.
Engine Model
n/a
Mitsubishi S3L2
Weight with ROPS and Loader
2,760 lb
Not Published
Weight with Cab and Loader
Not Applicable
Not Applicable
Warranty Length & Coverage
Up to 2 years or until the 2,000 hours mark, bumper-to-bumper warranty; 3000 hours maximum coverage period for parts and labour on drivetrains or powertrains; 12-months warranty period for implements, including loaders and backhoes.
3 Year or 2,000 Hour Bumper-to-Bumper Tractor Warranty; 7 Year or 3,000 Hour Limited Powertrain Tractor Warranty; 1 Year Implement/Attachment Warranty (such as Solis loaders)
Pump Type
Single Gear Pump
NOT FOUND
Steering Flow
4.3 gpm | 16.2 l/min
NOT FOUND — no source explicitly lists this value
Implement Flow
3.1 gpm | 11.7 l/min
3.98 gpm 15.1 lpm
Total Hydraulic Flow
7.4 gpm | 28 l/min
3.98 gpm
Hydraulic System Type
open center
open center
Rear Remote Hydraulic Flow
3.1 gpm 11.7 lpm
NOT FOUND — no source explicitly lists this value
Overall Hydraulic Pump Flow
Total: 7.9 gpm [Implement: 4.65 gpm | Steering: 3.3 gpm] - Note: older/dealer spec sheets also cite 7.4 gpm total; 7.9 gpm appears on 2025 model listing
3.98 gpm 15.1 lpm
No. of Optional Remote Valves
Optional (2)
NOT FOUND — no source explicitly lists this value
No. of Standard Remote Valves
0
NOT FOUND — no source explicitly lists this value
PTO Rear
540 rpm
540 (1.375)
PTO Type
Live
independent
Lift Control Type
Position
NOT FOUND — no source explicitly states lift control type (e.g., position control, draft control, or float) for the Solis H24
We'll send the full side-by-side spec sheet to your inbox so you can compare offline, or share this exact comparison with a link. No marketing follow-up.
