▶ EngineEngine Manufacturer TYM Yanmar Engine Model T1100N2 3TNV80F-SDKTFF Engine Type 3-cylinder, naturally aspirated diesel Water cooled, 4-cycle diesel No. of Cylinders 3 3 Displacement 71.7 in³ 77.3 in³ Rated Engine Speed 2800 rpm 3000 rpm Engine Power (Gross) 24 hp 24 hp PTO Power 18.3 hp 18.8 hp Engine Emissions Constraints Tier 4 Tier 4 Cooling System Type Liquid-cooled Water cooled, forced circulation Air Cleaner Single dry Single element Fuel System IDI Indirect fuel injection Alternator 50 A, 12 V 40 A, 12 V ▶ HydraulicsPump Type Dual gear pump Gear Pump Implement Flow 4.4 gpm 4.18 gpm Steering Flow 2.7 gpm 2.77 gpm Total Hydraulic Flow 7.1 gpm 6.95 gpm Overall Hydraulic Pump Flow 7.1 gpm 6.95 gpm Hydraulic System Type Open center Live, independent Rear Remote Hydraulic Flow Not Published Not Published No. of Standard Remote Valves 0 1 No. of Optional Remote Valves 1 Not Published ▶ Fluid CapacityFuel Tank Capacity 6.6 gal 5.81 gal Coolant Capacity 5.9 qt 0.96 gal Crankcase Capacity 4.5 qt 0.71 gal Transmission / Hydraulic System Capacity 4.7 gal 3.83 gal Front Axle Fluid Capacity 4.7 qt 0.85 gal ▶ PTO & HitchPTO Type Independent Independent PTO Rear 540 rpm 540 rpm Mid-PTO Availability Available Standard, 2,000 rpm @ 2,875 rpm Category, 3-Point Hitch Category I Category I Hitch Lift Capacity 1,534 lb 1,323 lb Hitch Lift Capacity (at 24”) 1,102 lb 1,058 lb Lift Control Type Position control Position ▶ Transmission & DrivetrainTransmission Type HST Hydraulic + mechanical H/L with constant-mesh No. of Speeds Infinite 2-Range 2 ranges (high/low), infinite forward and reverse Max Travel Speed (Forward) 12.9 mph 11.2 mph Max Travel Speed (Reverse) Not Published Not Published Clutch Dry single plate Electro-hydraulic PTO clutch assembly (hydrostatic drive, no traction clutch) Differential Lock & Limited Slip Options Differential lock 4WD with differential lock (bevel gears with diff-lock) ▶ Chassis, Steering & ControlsFrame Type Not Published Rigid unit: transmission case, engine and front axle support bolted together Steering Hydrostatic Hydrostatic power steering Brakes Wet disc Wet Disc, Foot operated, independent with provision of inter lock for simultaneous operation Seat Suspension & Adjustability Adjustable suspension seat Suspension seat with armrests & retractable seat belt Front Axle Type 4WD center-pivot, reverse Eliot type 4WD, center-pivot reverse Eliot type Front Axle Rating Not Published Not Published Drawbar Capacity Not Published Not Published ▶ Dimensions & ManeuverabilityOverall Length with 3-Point Hitch 107.8 in 100.5 in Overall Width 52.8 in 45.8 in Wheelbase 58.3 in 57.5 in Ground Clearance 7.7 in 9.4 in Min. Turn Radius without Brakes 105.5 in Not Published Height to Top of ROPS 89.8 in 91.3 in Height to Top of ROPS (folded) Not Published Not Published Height to Top of Cab Model Not Published Not Published ▶ WeightTractor Weight (Base) 1,881 lb 1,610 lb Weight with ROPS and Loader 2,564 lb 2,091 lb Weight with Cab and Loader Not Published Not Published ▶ Tire OptionsTire Size & Options R3 Turf, R4 Industrial R4 Industrial (Std), R3 Turf (Opt) R1 Ag (Opt), Goodyear R14 (Opt) R1 Agricultural - Front Not Published 6-12 R1 Agricultural - Rear Not Published 9.5-16 R3 Turf - Front Turf Master 23x8.50-12 NHS TL 4PR 20x8-10 R3 Turf - Rear Multi-Trac CS 33x12.50-16.5 NHS TL 4PR 29x12.5-15 R4 Industrial - Front Trac Chief 23x8.50-12 NHS TL 4PR 20x8-10 R4 Industrial - Rear Trac Chief 12-16.5 NHS TL 6PR 27x12.5-15 ▶ Loader & AttachmentsQuick Attach Loader System TX2000: Quick attach mechanism L75: skid-steer compatible quick-attach Loader Model TX2000 L75 Loader Lift Height TX2000: 86.9 in L75: 75.3 in (maximum lift height to pivot pin) Loader Lift Capacity (Full Height) TX2000: 1,380 lb L75: 947 lb (at pivot pin, to full height) Loader Breakout Force TX2000: 2,059 lb L75: 1,680 lb (at pivot pin) ▶ WarrantyWarranty Length & Coverage Up to 2 years or until the 2,000 hour mark, bumper-to-bumper warranty; 3000 hours maximum coverage period for parts and labour on drivetrains or powertrains; 12-months warranty period for implements, including loaders and backhoes. Full machine: 2 years or 2,000 hours; Powertrain: 8 years or 3,000 hours (no deductible, parts and labor) ▶ ITC Company AccessoriesAccessories that fit 
