▶ EngineEngine Manufacturer TYM Daedong Engine Model T2300T1-UTC_4 3HT-TH4C Engine Type 4-cylinder, turbocharged diesel Turbocharged diesel No. of Cylinders 4 3 Displacement 139.5 in³ 111.4 in³ Rated Engine Speed 2600 rpm 2750 rpm Engine Power (Gross) 58 hp 57.7 hp PTO Power 48 hp 45.1 hp Engine Emissions Constraints Tier 4 Tier 4 Cooling System Type Not Published Liquid-cooled Air Cleaner Dry element Not Published Fuel System IDI Not Published Alternator 70 A, 12 V Not Published ▶ HydraulicsPump Type Single gear pump Not Published Implement Flow 11.4 gpm 9.6 gpm Steering Flow 5.13 gpm 6.9 gpm Total Hydraulic Flow 16.5 gpm 16.5 gpm Overall Hydraulic Pump Flow 16.5 gpm 16.5 gpm Hydraulic System Type Not Published Open center Rear Remote Hydraulic Flow Not Published Not Published No. of Standard Remote Valves Loader: 6; Rear: 6 1 pair No. of Optional Remote Valves Not Published 1 pair (2nd pair optional) ▶ Fluid CapacityFuel Tank Capacity 15.3 gal 11.9 gal Coolant Capacity 6.2 qt Not Published Crankcase Capacity 4.8 qt Not Published Transmission / Hydraulic System Capacity 11.62 gal Not Published Front Axle Fluid Capacity 6.8 qt Not Published ▶ PTO & HitchPTO Type Independent Independent PTO Rear 540 rpm 540 rpm Mid-PTO Availability Not Published Optional: 2119 rpm Category, 3-Point Hitch Category II Category I Hitch Lift Capacity 4,409 lb Not Published Hitch Lift Capacity (at 24”) 3,748 lb 2,716 lb Lift Control Type Position and draft control (electronic) Hydraulic Position Control System ▶ Transmission & DrivetrainTransmission Type Power shuttle 3-Range HST No. of Speeds F12 x R12 Infinite forward and reverse (3-range) Max Travel Speed (Forward) 24.04 mph 18.0 mph Max Travel Speed (Reverse) Not Published 12.6 mph Clutch Wet, multi-disc Not Published Differential Lock & Limited Slip Options Standard differential lock Rear differential lock (standard) ▶ Chassis, Steering & ControlsFrame Type Not Published Not Published Steering Hydrostatic Hydrostatic power steering Brakes Wet, multi-disc Wet multi-disc Seat Suspension & Adjustability Suspension seat Adjustable seat (standard) Front Axle Type 4WD (selectable 2WD/4WD) Four-wheel drive (standard) Front Axle Rating Not Published Not Published Drawbar Capacity Not Published Not Published ▶ Dimensions & ManeuverabilityOverall Width 68.9 in 70.3 in (with industrial tires) Wheelbase 78.7 in 71.2 in Ground Clearance 18.1 in 15.3 in (with industrial tires) Min. Turn Radius without Brakes L: 139.7 in; R: 141.9 in 116.1 in (with brake applied) Height to Top of ROPS Not Published Not Applicable Height to Top of ROPS (folded) Not Published Not Applicable Height to Top of Cab Model 99.2 in 94.3 in Overall Length 141.5 in (with 3-point hitch) 125.5 in (with 3-point hitch) ▶ WeightTractor Weight (Base) 4,952 lb (weight with cab) 4,300 lb Weight with ROPS and Loader Not Published Not Published Weight with Cab and Loader 6,252 lb (4,952 + 1,300, computed; L4058PC loader total weight) Not Published ▶ Tire OptionsTire Size & Options R1 Agricultural, R4 Industrial, Golf tires Not Published R1 Agricultural - Front 9.5-20 8-16 R1 Agricultural - Rear 14.9-28 13.6-24 R3 Turf - Front 29x12.5-15 (golf tire) Not Published R3 Turf - Rear 44x18.00-20 (golf tire) Not Published R4 Industrial - Front 10.5/80-18 Not Published R4 Industrial - Rear 16.9-24 Not Published ▶ Loader & AttachmentsQuick Attach Loader System L4058PC: Quick attach mechanism Front-end loader with quick-tach mounting system Loader Model L4058PC FL9-2 Loader Lift Height L4058PC: 117.5 in 103.0 in (to pivot pin) Loader Lift Capacity (Full Height) L4058PC: 3,437 lb (at pivot pin) 1,858 lb (at pivot pin, max height) Loader Breakout Force L4058PC: 4,742 lb (at pivot pin, ground level) 3,938 lb (at pivot point) ▶ WarrantyWarranty Length & Coverage Basic 2 years or 2,000 hours; powertrain 3,000 hours maximum, parts and labor; loaders and backhoes 12 months Basic 24 months or 1,500 hours; powertrain 48 months for consumer use, or 36 months or 2,000 hours for business use ▶ ITC Company AccessoriesAccessories that fit None tagged yet 
