Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Focused entirely on one safety-critical pre-use check: verifying PTO shaft length before running a new implement. Mike opens with a real-world failure story from his dealer days, then demonstrates on his own tractor-flail mower combo why an overly long shaft causes damage and explains the two key clearance rules from the owner's manual. Closes with practical advice on having a dealer cut the shaft to fit. Best for new implement buyers unfamiliar with PTO fitment.
Tractor Mike is a longtime tractor-industry insider with decades of hands-on experience in the equipment business. He built his channel to help first-time and rural buyers make confident decisions, and his guidance comes from that deep, long-term background rather than a sales pitch.
If the PTO shaft is too long, hitting a bump or raising the implement can push everything back and cause damage, as happened with disc mowers after a supplier change.
At least an inch of clearance when the front and back halves are compressed, and at least 12 inches of overlap to carry the torque load.
Take the PTO shaft off, bring it to a local dealer who has a band saw, and have them cut a few inches off both the front and back half.