Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →An owner-operator walking through several overlapping repairs on a high-hour New Holland TC33D: a cracked frame welded back together after the dealer confirmed the part is discontinued, a front axle teardown tracing a fluid leak to a destroyed wheel bearing, and overdue 600-hour service on front axle fluid and the power steering filter/reservoir. Goes into real mechanical detail, bearing replacement, gear reassembly, seal fitting, making it useful to anyone facing similar issues on this tractor.
The wheel bearing cage was completely gone, so the axle sat tipped in the housing, which wore out the bearing seal and caused the leak.
Grind 45-degree angles as deep as possible into the crack, then fill it back and forth with MIG weld, keeping a bolt in place to hold position while welding.
The power steering reservoir doubles as a spin-off filter needing change every 600 hours; it was leaking and had apparently never been replaced despite nearly 3,000 hours.
The manual lists it as roughly a 600-hour service; the owner found the fluid dark black and shiny, suggesting it had likely never been done before.