Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Prompted by a viewer's real stuck-PTO problem, Mike walks through exactly two causes, a bent shaft and corrosion-seized telescoping sections, then gives a clear escalating fix sequence: penetrating oil, a come-along strapped to a tree, and finally taking it to a dealer shop. Short and practical. Best for new rural landowners who didn't grow up around farm equipment and need a plain-language starting point.
Tractor Mike is a longtime tractor-industry insider with decades of hands-on experience in the equipment business. He built his channel to help first-time and rural buyers make confident decisions, and his guidance comes from that deep, long-term background rather than a sales pitch.
It's likely stuck rather than too short. The two possible reasons are a bent shaft or corrosion from moisture causing the telescoping sections to seize together.
Get penetrating oil between the two shaft sections and yank on it until it comes loose. If that fails, strap the yoke to a come-along hooked around a tree and crank.
Lifting the cutter too high with the three point so it contacts the deck, or more commonly, going through ditches with the cutter attached.
Take it off at the back by the gearbox and bring it to your local dealer, who can use heat and force to get it apart.